PJ Boner Automation Services
Calibration, Weighing & Instrumentation Specialists Ireland

Batch Controllers

F030 Basic Batch Controller with One Output

F030: Basic Batch Controller with One Output
Description: Batch Controller
Inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave, Active pulse signal, 4-20 mA, 0-10 VDC
Power Options: 8-24 VAC or VDC, 115-230 VAC
Display: Seven 0.67″ (17 mm) digits for resettable total and Eleven 0.31″ (8 mm) digits for accum total
Case: IP67/NEMA 4X

Additional DescriptionMore Details

Large display shows preset value and running
batch value simultaneously.
• Self-learning overrun correction.
• Easy operation to enter a batch value and to
control the process.
• Count-up and count-down function available.
• Selectable on-screen engineering units;
volumetric or mass.
• Ability to process all types of flowmeter
signals.
• Operational temperature -40°C up to +80°C
(-40°F up to 178°F).
• Rugged aluminum field mount enclosure
IP67/NEMA4X.
• Intrinsically Safe – ATEX, IECEx, FM and CSA
approval for gas and dust applications.
• Explosion/flame proof II 2 GD EEx d IIB T5.
• LED backlight option.
• Loop or battery powered, 8 – 24V AC/DC or
115 – 230V AC power supply.
• Sensor supply 3.2 / 8.2 / 12 / 24V DC.

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

F116 Differential or Sum Indicator with Pulse and 4-20 mA Output

Differential or Sum Indicator with Pulse and 4-20 mA Output
Description: Differential/Sum Flow Computers
Inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave, Active pulse signal, 4-20 mA, 0-10 VDC
Outputs: Scaled pulse outputs and 4-20 mA/0-10 VDC
Power Options: 8-24 VAC or VDC, 115-230 VAC
Display: Seven 0.67″ (17 mm) digits for flow rate or total
Case: IP67/NEMA 4X

Additional DescriptionMore Details

The flowcomputer Model F116 has been
developed to calculate differential or total
volume. Typical applications are the measurement
of fuel consumption or the calculation of total
flow (sum) if – for costs reasons – two low cost
flowmeters can be used instead of one expensive
flowmeter. The usual difficulties encountered in
such applications include: pulsating flows, very
low consumption readings, vibration and high
ambient temperatures. These are all well catered
for in the design and operation of the F116.

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

F130 Batch Controller

Batch Controller with 2 Transistor Outputs, 2 Stage or Pulse, and External Start and Stop
Description: Batch Controller
Inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave, Active pulse signal, 4-20 mA, 0-10 VDC
Power Options: 8-24 VAC or VDC, 115-230 VAC
Display: Seven 0.67″ (17 mm) digits for actual total and Eleven 0.31″ (8 mm) for preset total
Case: IP67/NEMA 4X

Additional DescriptionMore Details

The F130 is a straight forward Batch controller
offering exactly what is required for many
applications. The operator can enter a batch
quantity easily or execute repeating batches.
During the batch, the preset value is displayed
as well as the batched (or remaining) quantity
and the units of measurement.
The automatic self-learning overrun correction
will ensure an accurate result each batch again.
A wide selection of options further enhance this
models capabilities, including Intrinsic Safety
and full Modbus communication.

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

F131 Batch Controller

F131: Batch Controller with Flow Rate, 4-20 mA and 2 Stage or Pulse Output External Start and Stop
Description: Batch Controller
Inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave, Active pulse signal, 4-20 mA, 0-10 VDC
Power Options: 8-24 VAC or VDC, 115-230 VAC
Display: Seven 0.67″ (17 mm) digits for actual total and Eleven 0.31″ (8 mm) for preset total
Case: IP67/NEMA 4X

Additional DescriptionMore Details

The F131 offers in addition to the standard
functions an analog output signal in relation to
the flow rate. The operator can enter a batch
quantity easily or execute repeating batches.
During the batch, the preset value is displayed
as well as the batched (or remaining) quantity
and the flow rate. The automatic self-learing
overrun correction will ensure an accurat result
each batch again. A wide selection of options
further enhance this models capabilities.

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

F136 Batch Controller

Batch Controller with 4-20 mA According to the Process with 2 Stage or Pulse Output
Description: Batch Controller
Inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave, Active pulse signal, 4-20 mA, 0-10 VDC
Power Options: 8-24 VAC or VDC, 115-230 VAC
Display: Seven 0.67″ (17 mm) digits for actual total and Eleven 0.31″ (8 mm) for preset total
Case: IP67/NEMA 4X

Additional DescriptionMore Details

Introduction
The F136 offers in addition to the standard
functions an analog output signal in relation to
the batch proces. This to transmit the course of
the process.
The operator can enter a batch quantity easily or
execute repeating batches. During the batch,
the preset value is displayed as well as the
batched (or remaining) quantity. The automatic
self-learning overrun correction will ensure an
accurat result each batch again.

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

PD6210 ProVu Analog Input Batch Controller

PD6210: ProVu Analog Input Batch Controller

Input: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave)
Display: Dual-line 6-digit, 0.60″ (15 mm) & 0.46″ (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Additional DescriptionMore Details

BATCH CONTROL FEATURES
•Start/Pause/Stop, Change Batch with Front Buttons
•Display Batch Total, Rate, Grand Total, Count or Preset
•Single or Multi-Stage Batch Control (Up to 8 Relays)
•Automatic Overrun Correction
•Rate in Units per Second, Minute, Hour, or Day
•Automatic or Manual Batch Control
•Low or High Flow Alarms while Batching
•9 Digit Grand Total with Overflow Feature
•Count Up or Down with Each Batch
•Program and Control with a Computer
Using MeterView Pro

ADDITIONAL FEATURES
•PD6210: 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and
±10 V Inputs
•PD6310: Pulse, Open Collector, NPN, PNP, TTL, Switch
Contact, Sine Wave (Coil), Square Wave Inputs
•Large Dual-Line 6-Digit Display, 0.60″ & 0.46″
•NEMA 4X, IP65 Front
•85-265 VAC or 12/24 VDC Input Power
•Sunlight Readable Display Models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232, & RS-485 Modules for Modbus® RTU


€0.00Price:
Loading Updating cart…

PD6310 ProVu Pulse Input Batch Controller

PD6310 ProVu Pulse Input Batch Controller

Input: Pulse, open collector, NPN, PNP, TTL, switch contact,
sine wave (coil), square wave, Modbus PV (slave)
Display: Dual-line 6-digit, 0.60″ (15 mm) & 0.46″ (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Additional DescriptionMore Details

BATCH CONTROL FEATURES
•Start/Pause/Stop, Change Batch with Front Buttons
•Display Batch Total, Rate, Grand Total, Count or Preset
•Single or Multi-Stage Batch Control (Up to 8 Relays)
•Automatic Overrun Correction
•Rate in Units per Second, Minute, Hour, or Day
•Automatic or Manual Batch Control
•Low or High Flow Alarms while Batching
•9 Digit Grand Total with Overflow Feature
•Count Up or Down with Each Batch
•Program and Control with a Computer
Using MeterView Pro

ADDITIONAL FEATURES
•PD6210: 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and
±10 V Inputs
•PD6310: Pulse, Open Collector, NPN, PNP, TTL, Switch
Contact, Sine Wave (Coil), Square Wave Inputs
•Large Dual-Line 6-Digit Display, 0.60″ & 0.46″
•NEMA 4X, IP65 Front
•85-265 VAC or 12/24 VDC Input Power
•Sunlight Readable Display Models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232, & RS-485 Modules for Modbus® RTU


€0.00Price:
Loading Updating cart…
LoadingUpdating…

Copyright © 2014 P.J.Bonner