PJ Boner Automation Services
Calibration, Weighing & Instrumentation Specialists Ireland

Controllers

PD662 Survivor 3½+ Digit NEMA 4X Meter

PD662 Survivor 3½+ Digit NEMA 4X Meter

INTRODUCTION
The PD662 NEMA 4X, CSA Certified loop-powered meter is perfect for applications where a simple, inexpensive display is required and AC power is not available. The PD662 derives all its power from the 4-20 mA loop. The PD662 is scaled using four push buttons and can be done without applying an actual calibration signal. The PD662′s display will read up to 2999; we call this 3+ digits! The loop-powered backlighting option lets you see the display under any lighting condition and is powered completely from the 4-20 mA loop. This means there is no need for additional wiring and never any batteries to change. The PD662 is housed in a rugged NEMA4X enclosure and is provided with one ½” NPT pipe conduit hole.The PD662 is also available with an optional DC-powered heater that allows the PD662 to operate in temperatures as low as -55°C.

Additional DescriptionMore Details

FEATURES
•4-20 mA Input
•3½+ Digit 0.6″ Display
•Easy Four-Button Programming
•NEMA 4X Enclosure
•Programmable Noise Filter
•Loop-Powered Backlight Option
•Max/Min Display
•HART Protocol Transparent
•1.7 V Drop without Backlight
•CSA Certified for -40 to 75°C Operation
(-55 to 75°C with Heater Option)


€0.00Price:
Loading Updating cart…

PD6800 ProtEX 5 Digit Explosion-Proof Loop-Powered Process

PD6800 ProtEX 5 Digit Explosion-Proof Loop-Powered Process

The new ProtEX-Pro PD6800 explosion-proof process meter brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance. The PD6800 delivers all these and more. Spend a few minutes reviewing the features described in the graphic below and you will see how!

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7″ high and shows 5 digits of flow rate. The lower display is 0.4″ high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle

Additional DescriptionMore Details

FEATURES
4-20 mA Input Loop-Powered
Modern, Sleek and Practical Enclosure
5-Digit, 0.7″ (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4″ (10.2 mm) Lower Display
SafeTouch® Through-Glass Button Programming
Password Protection
32-Point , Square Root, or Exponential Linearization
Loop or External DC-Powered Backlight Standard
3.0 V Drop (6.0 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

ADDITIONAL FEATURES
Password Protection
A 5-digit password prevents unauthorized changes to the programmed parameter settings. The lock symbol is displayed to show that settings are protected. If the meter is password protected, the meter will display the message LOCKED when the Menu button is pressed.

Alarm Indication
The PD6800 has high or low alarm indication. When in alarm, the display will flash, and a HI or LO symbol is displayed. The alarm has an adjustable deadband (the difference between the set and reset points). The alarm is acknowledged by pressing the ENTER/ACK button.


€0.00Price:
Loading Updating cart…

PD6820 ProtEX-RT 5 Digit Explosion-Proof Loop-Powered Rate/Totalizer

PD6820 ProtEX-RT 5 Digit Explosion-Proof Loop-Powered Rate/Totalizer

The new ProtEX-RTA PD6820 explosion-proof rate/totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance. The PD6820 delivers all these and more. Spend a few minutes reviewing the features described in the graphic below and you will see how!

Additional DescriptionMore Details

FEATURES
4-20 mA Input Loop-Powered
5-Digit, 0.7″ (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4″ (10.2 mm) Lower Display
Loop or External DC-Powered Backlight Standard
SafeTouch® Through-Glass Button Programming
Password Protection
3.0 V Drop without Backlight
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
Linear, Square Root, or Programmable Exponent
Operates from -40 to 75°C
Rate in Second, Minute, Hour, or Day
Open Collector Pulse or Alarm Output

Modern, Sleek and Practical Enclosure
The first thing customers notice about a product is its enclosure and the ProtEX-RTA really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTA shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾” NPT conduit holes for wiring.

Isolated Open Collector Output

The isolated open collector output on the PD6820 may be assigned for use with the alarm or totalizer (pulse output). The rating of the output is 30 VDC @ 150 mA max.


€0.00Price:
Loading Updating cart…

PD6830 ProtEX-RT 5 Digit Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer

PD6830 ProtEX-RT 5 Digit Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer

The new ProtEX-RTP PD6830 explosion-proof rate/totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance. The PD6830 delivers all these and more. Spend a few minutes reviewing the features described in the graphic below and you will see how!

Additional DescriptionMore Details

KEY FEATURES
Informative & Easy to Read Display

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7″ high and shows 5 digits of flow rate. The lower display is 0.4″ high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.

Through-Glass SafeTouch® Buttons

The PD6830 is equipped with four sensors that operate as through glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.

Modern, Sleek and Practical Enclosure

The first thing customers notice about a product is its enclosure and the ProtEX-RTP really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTP shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾” NPT conduit holes for wiring and one ¾” NPT hole for flowmeter connection.

Wide Viewing Angle

Customers can’t always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6830 is designed to be looked at.


€0.00Price:
Loading Updating cart…

PD6870 ProtEX One 3½ Digit Explosion-Proof Loop-Powered Process Meter

PD6870 ProtEX One 3½ Digit Explosion-Proof Loop-Powered Process Meter

INTRODUCTION
The PD6870 is a rugged, loop-powered meter with 1″ display digits in an explosion-proof enclosure for demanding applications in hazardous areas or in the harshest environmental conditions. The meter derives all of its power from the 4-20 mA loop; with a small
1 volt drop for use in almost any current loop and application.

It is programmed using four easy to access front-mounted trim potentiometers. No complex or difficult to read programming menus are necessary for setup. The numeric display will read from -1999 to 1999 over a 2000 count user adjustable scaling span. The backlight option lets you see the display under any lighting condition and is powered from the 4-20 mA loop with no additional power supply required.

The enclosure has two threaded conduit holes, one pre-installed conduit plug, and integrated pipe or wall mounting slotted flanges.

Additional DescriptionMore Details

FEATURES
4-20 mA Input
Modern, Sleek and Practical Enclosure
3½ Digits, 1″ (25.4 mm) Display
Display Mountable at 0°, 90°, 180°, & 270° Degrees
Easy Calibration and Installation
Loop-Powered Backlight Option
1 V Drop (4 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

General
Display: 3½ digit LCD, 1″ (25.4 mm); -1,999 to 1,999
Display Update Rate: 2.5 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation
Overrange: Display reads 1 on the left most digit
Programming Method: Four front mounted trim potentiometers accessed when the cover is removed.
Recalibration: Recommended at least every 12 months.
Normal Mode Rejection: 60 dB rejection ratio
Operating Temperature Range: -40 to 75°C
Storage Temperature Range: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Screw terminals accept 12 to 22 AWG wire
Enclosure: Explosion-proof die cast aluminum with glass window, 0.30% max copper content, corrosion resistant epoxy coating, color: blue. NEMA 4X, IP68. Two ¾” NPT threaded conduit openings. One ¾” NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½” to 2½” or DN 40 to 65 mm pipe mounting.
Overall Dimensions: 5.65″ x 5.25″ x 4.86″ (144 mm x 133 mm x 124 mm) (W x H x D)
Weight: 5.00 lbs (80 oz, 2.27 kg)
Warranty: 3 years parts and labor


€0.00Price:
Loading Updating cart…

PD8-6000 ProtEX-MAX Process Meter

PD8-6000 ProtEX-MAX Process Meter

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2 , Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

Additional DescriptionMore Details

FEATURES
Modern, Sleek and Practical Enclosure
All models available with sunlight readable displays
Display Mountable at 0°, 90°, 180°, & 270° Degrees (Display models)
Explosion-Proof, IP68, NEMA 4X Enclosure
Models Available with ProVu®, Trident X2 , Snooper, or Vigilante® II Functionality
SafeTouch® Through-Glass Button Programming
Password Protection (Select models)
Modbus® RS-485 Serial Communications
Flanges for Wall or Pipe Mounting

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models (“H” model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.


€0.00Price:
Loading Updating cart…

PD8-6060 ProtEX-MAX Dual Input Process Meter

PD8-6060 ProtEX-MAX Dual Input Process Meter

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2 , Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

Additional DescriptionMore Details

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models (“H” model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.

Through-Glass SafeTouch® Buttons

The PD8 is equipped with up to four sensors that operate as through-glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, mechanical buttons located on the faceplate are used.

Modern, Sleek and Practical Enclosure

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2, Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.


€0.00Price:
Loading Updating cart…

PD8-6200 ProtEX-MAX Analog Input Rate/Totalizer

PD8-6200 ProtEX-MAX Analog Input Rate/Totalizer

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2 , Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

Additional DescriptionMore Details

Features

Displays rate and total simultaneously
Open channel flow with programmable exponent
Isolated 24 VDC @ 200 mA transmitter power supply
32-point linearization with free software
Total, grand total, or non-resettable grand total
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules


€0.00Price:
Loading Updating cart…

PD8-6210 ProtEX-MAX Analog Input Batch Controller

PD8-6210 ProtEX-MAX Analog Input Batch Controller

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2 , Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

Additional DescriptionMore Details

Quick Overview

Input: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave)
Display: Dual-line 6-digit, 0.60″ (15 mm) & 0.46″ (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Start, batch, & stop with pause front panel buttons
Display batch total + rate, grand total, batch count or preset
Single or multi-stage batching with up to 8 relays
Automatic overflow correction
Manual control or automatic batching
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply
Grand total can count up or down

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules


€0.00Price:
Loading Updating cart…

PD8-6300 ProtEX-MAX Pulse Input Rate/Totalizer

PD8-6300 ProtEX-MAX Pulse Input Rate/Totalizer

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2 , Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

Additional DescriptionMore Details

Quick Overview

Input: Pulse, open collector, NPN, PNP, TTL, switch contact,
sine wave (coil), square wave; Modbus PV (slave)
Display: Dual-line 6-digit, 0.60″ (15 mm) & 0.46″ (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Displays rate and total simultaneously
5, 10, or 24 VDC flowmeter power supply
Gate function for rate display of slow pulse rates
4-20 mA output option converts the pulse input to an isolated
4-20 mA output
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules


€0.00Price:
Loading Updating cart…
Page 1 of 212
LoadingUpdating…

Copyright © 2014 P.J.Bonner