SL50-INTERFACE-USB – USB Interface Cable
USB communication interface for connecting all SL50 series data loggers to a computer. You will probably only need one interface lead even if you have a number of loggers.
The SL50-ACC07 is an alarm viewer for all SL50 series data loggers. Just place the data logger in the socket and press the button. A green lamp will illuminate if the alarms have not been triggered and a red light will illuminate if they have.
A coloured waterproof enclosure which is slightly larger than the SL50-ACC06. Being blue and yellow, the SL50-ACC08 is easier to spot when mixed with product. And the blue handle makes the bung easier to remove. Please note, unlike the SL50-ACC06, the SL50-ACC08 floats in fluid.
The enclosure may be reused many times but the actual number of times depends upon many factors such as the temperature, the liquid type , the duration. Each time before use carefully inspect the cap for signs of damage and if in doubt discard.
Diameter Ø21.6mm, Length 55.0mm
Supplied in packs of five or ten
A lower cost alternative to the SL-ACC01. The
SL-ACC03 is constructed from Polyphenylene Sulphide (PPS Ryton) with black flat finish. This produces a lightweight enclosure that protects the data logger at pressures up to 1 Bar or depths of 10m. Maximum operating temperature +125°C.
Diameter Ø25.4mm, Height 28.0mm
Weight: 15g excluding data logger
SL50-ACC02 – MiniTag Holder
Rubberised holder suitable for use with all SL50 series button data loggers. The rubberised holder provides a quick and easy method for mounting the button data loggers. You have the option of using the mounting hole or the strong magnet that is fixed to the back of the holder.
SL50-ACC01 – Stainless Steel Enclosure
316 stainless steel enclosures that protect the SL50 series data loggers in harsh environments or where there is likely to pressures in excess of 100mB. The SL50-ACC01 can be used with pressures up to 10 Bar or submerged in up to 100m water.
Operating Temperature Range: -15°C to +140°C
Diameter Ø25.0mm, Height 18.5mm, widest part of the hex nut is 29.0mm.
Weight: 40g excluding data logger