PJ Boner Automation Services
Calibration, Weighing & Instrumentation Specialists Ireland

Digital Indicators

TH300 Humidity / Temperature Transmitter

Humidity / Temperature Transmitter
Class 300 transmitters have 2 analogue outputs which correspond to the first 2 parameters displayed. You can activate 1 or 2 outputs, and for each output, you can choose between humidity, temperature and other functions.

Additional DescriptionMore Details

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer – 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
ALU or ABS housing
WITH or WITHOUT display
TH300
remote probe
TH300
standard
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer – 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range …………………………………0 to 100 % RH
Units of measurement …………………………% RH
Accuracy*(Repeatability, linearity, hysteresis) ……±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ……………………±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ……………………………………<10 sec. (from 10% RH to 80%RH, Vair=2m/s) Resolution .................................................0,1 % RH Factory calibration uncertainty ...............±0.88%RH Type of sensor ..........................................capacitive Type of fluid ...............................................air and neutral gases (high resistance to solvents) Temperature
Measuring range …………………………………from -20 to +120°C (polycarbonate probe)
from -40 to +180°C (stainless steel probe)
Units of measurement …………………………°C, °F
Accuracy * ………………………………………….±0,3% of reading ±0,25°C
Response time …………………………………… t = 9 sec. for V = 1 m/s 0,9 air
Resolution ………………………………………….0,1°C
Type of sensor…………………………………….Pt 100 1/3 selon DIN IEC 751
Type of fluid………………………………………..air and neutral gases

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

PD6060 ProVu Dual Input Process Meter

PD6060: ProVu Dual Input Process Meter

Input: Dual 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V);
Modbus PV (slave)
Display:bDual-line 6-digit, 0.60″ (15 mm) & 0.46″ (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

ADVANCED, VERSATILE, & CUSTOMIZABLE
The ProVu PD6060 meter combines two independently programmed analog inputs with powerful math functions to make an advanced meter capable of handling complex math requirements common in the process industry. Various math functions may be applied to the inputs including addition, difference, average, multiplication, division, ratio, and more. A customizable dual-line display allows a wide variety of input variables, math calculations, or units and tags to be displayed based on your application needs.

PD6060 KEY FEATURES
The ProVu PD6060 meter is the mathematician of the ProVu family. Its two process input channels and math functions make it unique while still maintaining all the great features of the ProVu family.

Additional DescriptionMore Details

•Dual-Input Process Meter with Math Functions
•Addition, Difference, Average, Multiplication, Division, Min, Max, Weighted Average, Ratio, Concentration, & More
•0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
•Large Dual-Line 6-Digit Display, 0.60″ & 0.46″
•Sunlight Readable Display Models
•NEMA 4X, IP65 Front
•Universal 85-265 VAC, or 12/24 VDC Input Power Models
•Isolated 24 VDC @ 200 mA Transmitter Power Supply

•Programmable Display & Function Keys
•32-Point, Square Root, or Exponential Linearization
•Multi-Pump Alternation Control
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232 & RS-485 Serial Communication Options
•Modbus® RTU Communication Protocol Standard
•Free MeterView® Pro Software for Operation, Monitoring, and Programming


€0.00Price:
Loading Updating cart…

PD663 ProtEX Lite 3½+ Digit Explosion-Proof Loop-Powered Meter

PD663 ProtEX Lite 3½+ Digit Explosion-Proof Loop-Powered Meter

The PD663 is a rugged, explosion-proof NEMA 4X loop-powered meter perfect for applications where a simple, inexpensive display is required in a hazardous area.

The PD663 derives all its power from the 4-20 mA loop. The PD663 is scaled using four push buttons and can be done without applying an actual calibration signal, and through the explosion-proof enclosure with optional magnetic reed switches and a magnet key. The PD663′s display will read up to 2999; we call this 3½+ digits! The loop-powered backlighting option lets you see the display under any lighting condition and is powered completely from the 4-20 mA loop. This means there is no need for additional wiring and never any batteries to change.

The PD663 is housed in a rugged, explosion-proof, cast aluminum, NEMA 4X enclosure and is provided with two threaded conduit holes and integrated pipe or wall mounting flanges.

Additional DescriptionMore Details

General:
Display: 0.6″ (15.24 mm) LCD, 3½+ digits; -1999 to 2999
Display Update Rate: 2 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation.
Over-Range: Display Flashes 2999
Under-Range: Display Flashes -1999
Programming Method: 4 Front Panel Pushbuttons (behind glass). Magnet may also be used for programming; P/N PDA-MAG.
Noise Filter: Programmable HI, LOW, or OFF
Recalibration: Recalibration is recommended at least every 12 months.
Max/Min Display: Max/Min readings reached by the process are stored until reset by the user or until power to the meter is turned off.
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Normal Mode Rejection: 64 dB at 50/60 Hz
Operating Temperature: -40 to 75°C
Storage Temperature: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminals accept 12 to 22 AWG
Tightening Torque: Screw terminal connectors: 4.5 lb-in (0.5 Nm)
Enclosure: Explosion-proof cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X, IP68. Two ½” NPT threaded conduit openings. One ½” NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two mounting holes for 1.5″ pipe or wall mounting.
Weight: 40 oz (1.13 kg)
Overall Dimensions: 4.30″ x 4.27″ x 3.62″ (109 mm x 108 mm x 92 mm) (W x H x D)
Warranty: 3 years parts & labor


€0.00Price:
Loading Updating cart…

PD650 2.3″ Display Aluminum NEMA 4X Meter

PD650 2.3″ Display Aluminum NEMA 4X Meter

The PD650, PD655 and PD656 are Large Display Process Meters with flow rate, totalizer and batch control capabilities. Each accepts the common process signals such as 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC and displays these signals in engineering units on a large, high efficiency, 4½digit red LED display. All units also provide two isolated 24 V power supplies to drive both the input and output loops. Options include up to 4 relays for alarms or batch controlling, as well as an isolated 4-20 mA transmitter output.

Additional DescriptionMore Details

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total


€0.00Price:
Loading Updating cart…

PD655 1.0″ Display Plastic NEMA 4X Meter

PD655 1.0″ Display Plastic NEMA 4X Meter

GENERAL FEATURES

The PD650, PD655 and PD656 are Large Display Process Meters with flow rate, totalizer and batch control capabilities. Each accepts the common process signals such as 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC and displays these signals in engineering units on a large, high efficiency, 4½digit red LED display. All units also provide two isolated 24 V power supplies to drive both the input and output loops. Options include up to 4 relays for alarms or batch controlling, as well as an isolated 4-20 mA transmitter output.

Single Button Scaling

Single button scaling means that these meters can be completely programmed using only one button. Simply press the ENTER button to initiate the automatic menu scan. When the desired menu appears press the ENTER button again. Once in a menu, press the ENTER button when the display reads the desired value. To exit setup & programming press the ACK (Acknowledge) button while displaying any of the main menus. It’s that simple!

Additional DescriptionMore Details

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total

Stand Alone Scaling (Internal or External)
These meters may be scaled without a signal source or calibrated with a signal source.

Lockout and Menu-Title Disabling

The ability to modify programming values can be restricted by installing a lockout jumper on terminals at the rear of the instrument. In addition, certain menu titles can be programmed not to appear during the menu scroll.


€0.00Price:
Loading Updating cart…
LoadingUpdating…

Copyright © 2014 P.J.Bonner