The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, available on our website, PC configuration allows you to measure any one of these 4 parameters on the SEM161.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate
either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.

- Measures humidity, temperature, dewpoint or delta t
- Single channel 4/20 output for any one of the above
- Programmable using USB powered configurator
- Duct, Wall or remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, available on our website, PC configuration allows you to measure any one of these 4 on any two parameters.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate
either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

- Measures humidity, temperature, dewpoint or delta t
- Dual channel 4/20 output for any two of the above
- Programmable using USB powered configurator
- Duct, Wall or remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

The SEM165 probe operates from (-30 to 140) °C.

Single hole mounting via a ¼" BSP pressure gland allows for simple installation into ducts pipes or process chambers and facilitates adjustment of insertion depth. The Status SCH4 terminal head is sealed to IP65 with cable entry via an M20 cable gland. High temperature RH probe operation option from (-30 to 140) °C and presents a versatile solution for the majority of humidity and temperature control applications.

- Duct mount
- Measures up to 140 Deg C
- Stainless Steel Probe
- Rapid response
- Humidity or temperature display option

Download Product Data Sheet

- Interchangeable measurement modules
- User-friendly (Joystick navigation)
- Large graphic display
- Blue backlight
- Up to 8,000 measurement points
- Up to 6 measurements simultaneously
- Instrument/PC wireless communication
- Wireless probes

Interchangeable measurement modules
1 instrument = more than 1 range and 1 parameter available.

Wireless connection
Instrument / PC
Instrument / probe

Smart-plus system
Wireless or wired probes automatically recognized when connected to the instrument.

HD 200 STD – Current/voltage module – Standard Smart-plus probe
HD 200 HT – Current/voltage module – High temperature Smart-plus probe

Download Product Data Sheet

• Humidity transmitter type HM 50
• Range 0-100 %RH
• 0-10 V output, active sensor, power supply 24 Vac/Vdc (3-4 wires) or 4 -20 mA output, passive loop, power supply 18 to 30 Vdc (2 wires)
• ABS IP 30 housing, without display
• Quick and easy mounting with the “ ¼ turn” system with wall-mount plate

Measuring range.................................0 to 100 %RH
Unit of measurement..........................% RH
Response time....................................1/e(63%) 4 s
Type of fluid ........................................air and neutral gases

Download Product Data Sheet

This new technology allows for accurate process measurements, is extremely reliable, and offers excellent long-term stability. The sensor is very durable and moisture resistant.

The “Humi-chip” module that incorporates the sensor can be easily interchanged without the need for re-calibration.

For further operator ease of use, relative humidity values can be displayed on the optional integrated LCD display, or sent via analogue outputs to other display devices.

- 4/20mA or 0/10V output
- 24v AC /DC power supply
- Wall, duct remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

Functions
- Relative humidity, dew point and ambient temperature
- Selection of units (temperature and dew point)
- HOLD function
- Minimum and maximum values
- Adjustable automatic shut-off
- Adjustable backlight

technical Features
Measuring element...................Hygrometry and temperature :
CMOS sensor
Display......................................2 lines, LCD technology. Sizes 50 x 34.9 mm.
1 line of 5 digits with 7 segments (value)
1 line of 5 digits with 16 segments (unit)
Housing.....................................Shock-proof made of ABS, IP54 protection
or IP65 with food industry protective cover
Keypad......................................Metal-coated with 5 keys
Cable.........................................retractable, length 450 mm, up to 2.4 m when
released
Conformity................................electromagnetical compatibility (NF EN 61326-1 guideline)
Power supply............................1 alcaline battery 9V 6LR61
Operating temperature (instrument)...from 0 to 50°C
Operating temperature (probe).......from -20 to +70°C
Storage temperature................from -20 to +80°C
Auto shut-off.............................adjustable from 0 to 120 min
Weight.......................................190g
Languages................................French, english

• Configurable intermediate ranges
• Functions : relative and absolute humidity, dew point, wet and dry temperature,
enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• KIMO external transmitter inputs (Class 200 and 300)
• 2 analogue outputs 4-20 mA (4 wires) or 0-10 V, RS 232,
4 6A/230 Vac RCR relays (for Ref. CPA300)
2 6A/230 Vac RCR relays (for Ref. CPA300HV)
• Audible alarms (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• Multi-directional housing made of ABS V-0 as per UL 94
• Large display (50 x 190 mm)

Humidity
Units of measurement ..............................%RH
Accuracy*(Repeatability, linearity, hysteresis)........±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ........................±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ..........................................<10 sec. (from 10%RH to 80%RH, V = 2 m/s) air
Resolution .................................................0,1 %RH
Factory calibration uncertainty...............±0.88%RH
Type of sensor...........................................capacitive
Type of fluid ...............................................air et neutral gases (high resistance to solvents)

Temperature
Measuring range .......................................from -20 to +120°C (Polycarbonate probe)
from -40 to +180°C (st.steel probe)
Units of measurement ..............................°C, °F
Accuracy .................................................± 0,3% of reading ± 0,25°C
Response time .......................................... = 9 sec. for = 1 m/s
Resolution .................................................0,1°C
Type of sensor...........................................Pt 100 1/3 as per DIN IEC751
Type of fluid...............................................air et neutral gases

Download Product Data Sheet

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
ALU or ABS housing
WITH or WITHOUT display
TH300
remote probe
TH300
standard
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range .......................................0 to 100 % RH
Units of measurement ..............................% RH
Accuracy*(Repeatability, linearity, hysteresis) ......±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ........................±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ..........................................<10 sec. (from 10% RH to 80%RH, Vair=2m/s)
Resolution .................................................0,1 % RH
Factory calibration uncertainty ...............±0.88%RH
Type of sensor ..........................................capacitive
Type of fluid ...............................................air and neutral gases (high resistance to solvents)

Temperature
Measuring range .......................................from -20 to +120°C (polycarbonate probe)
from -40 to +180°C (stainless steel probe)
Units of measurement ..............................°C, °F
Accuracy * .................................................±0,3% of reading ±0,25°C
Response time .......................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution .................................................0,1°C
Type of sensor...........................................Pt 100 1/3 selon DIN IEC 751
Type of fluid...............................................air and neutral gases

Download Product Data Sheet

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable intermediate ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro system interchangeable probes (PC or Stainless Steel)
• On-site calibration
• Simultaneous display of 2 parameters
• 2 outputs 4-20 mA or 0-10V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• ABS IP 65 housing, with or without 2-line backlit display.
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range.................................0 to 100 %RH
Units of measurement........................%RH
Accuracy*(Repeatability, linearity, hysteresis) ±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence..................±0.04 x (T-20)%RH (if T<15°C or T>25°C)
Response time ....................................<10 sec. (from 10% RH to 80%RH, V =2m/s) air
Resolution ...........................................0,1 %RH
Factory calibration uncertainty .........±0.88%RH
Type of sensor ....................................capacitive
Type of fluid.........................................air and neutral gases (high resistance to solvents)

Temperature
Measuring range.................................from -20 to +120°C ( polycarbonate probe)
from -40 to +180°C (st.steel probe)
Units of measurement........................°C, °F
Accuracy *...........................................±0,3% of reading ±0,25°C
Response time.................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution...........................................0,1°C
Type of sensor....................................Pt 100 1/3 as per DIN IEC 751
Type of fluid ........................................air and neutral gases

Download Product Data Sheet