Transmitter
SEM162D/HP - Duct Mount Humidity / Temperature Transmitters
SEM162D/HP – Duct Mount Humidity / Temperature Transmitters
Measures humidity, temperature, dewpoint or delta t
Dual channel 4/20mA output for any two of the above
Programmable using USB powered configurator
Display option
Plug in digital sensor
The SEM162 is a “smart” humidity transmitter with 2 x (4 to 20) mA two wire outputs. The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to output any 2 of these 4 parameters.
More Details
Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.
The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.
Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.
SEM161W/H - Wall Mount Humidity Transmitters
SEM161W/H – Wall Mount Humidity Transmitters
Measures humidity, temperature, dewpoint or delta t
Single channel 4/20mA output for any one of the above
Programmable using USB powered configurator
Display option
Plug in digital sensor
The SEM161 is a “smart” humidity transmitter sensor with a single two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available.
The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to measure any one of these 4 parameters on the SEM161.
More Details
Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.
The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.
Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.
SEM161R/H - Remote Mount Humidity Transmitters
SEM161R/H – Remote Mount Humidity Transmitters
Measures humidity, temperature, dewpoint or delta t
Single channel 4/20mA output for any one of the above
Programmable using USB powered configurator
Display option
Plug in digital sensor
The SEM161 is a “smart” humidity transmitter sensor with a single two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available.
The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to measure any one of these 4 parameters on the SEM161.
More Details
Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.
The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.
Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.
SEM161D/H - Duct Mount Humidity Transmitters
SEM161D/H – Duct Mount Humidity Transmitters
Measures humidity, temperature, dewpoint or delta t
Single channel 4/20mA output for any one of the above
Programmable using USB powered configurator
Display option
Plug in digital sensor
The SEM161 is a “smart” humidity transmitter sensor with a single two wire (4 to 20) mA output. The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available.
The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, PC configuration allows you to measure any one of these 4 parameters on the SEM161.
More Details
Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.
The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.
Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.
TH200 Humidity / Temperature Transmitter
Humidity / Temperature Transmitter
More Details
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable intermediate ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro system interchangeable probes (PC or Stainless Steel)
• On-site calibration
• Simultaneous display of 2 parameters
• 2 outputs 4-20 mA or 0-10V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• ABS IP 65 housing, with or without 2-line backlit display.
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate.
Humidity
Measuring range.................................0 to 100 %RH
Units of measurement........................%RH
Accuracy*(Repeatability, linearity, hysteresis) ±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence..................±0.04 x (T-20)%RH (if T<15°C or T>25°C)
Response time ....................................<10 sec. (from 10% RH to 80%RH, V =2m/s) air
Resolution ...........................................0,1 %RH
Factory calibration uncertainty .........±0.88%RH
Type of sensor ....................................capacitive
Type of fluid.........................................air and neutral gases (high resistance to solvents)
Temperature
Measuring range.................................from -20 to +120°C ( polycarbonate probe)
from -40 to +180°C (st.steel probe)
Units of measurement........................°C, °F
Accuracy *...........................................±0,3% of reading ±0,25°C
Response time.................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution...........................................0,1°C
Type of sensor....................................Pt 100 1/3 as per DIN IEC 751
Type of fluid ........................................air and neutral gases
TH300 Humidity / Temperature Transmitter
Humidity / Temperature Transmitter
Class 300 transmitters have 2 analogue outputs which correspond to the first 2 parameters displayed. You can activate 1 or 2 outputs, and for each output, you can choose between humidity, temperature and other functions.
More Details
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.
Humidity
ALU or ABS housing
WITH or WITHOUT display
TH300
remote probe
TH300
standard
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.
Humidity
Measuring range .......................................0 to 100 % RH
Units of measurement ..............................% RH
Accuracy*(Repeatability, linearity, hysteresis) ......±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ........................±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ..........................................<10 sec. (from 10% RH to 80%RH, Vair=2m/s)
Resolution .................................................0,1 % RH
Factory calibration uncertainty ...............±0.88%RH
Type of sensor ..........................................capacitive
Type of fluid ...............................................air and neutral gases (high resistance to solvents)
Temperature
Measuring range .......................................from -20 to +120°C (polycarbonate probe)
from -40 to +180°C (stainless steel probe)
Units of measurement ..............................°C, °F
Accuracy * .................................................±0,3% of reading ±0,25°C
Response time .......................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution .................................................0,1°C
Type of sensor...........................................Pt 100 1/3 selon DIN IEC 751
Type of fluid...............................................air and neutral gases
Loading...
