SU 130 is the best sound level meter for measuring noise levels in areas such as the environment, mechanical applications, in the car industry or similar noisy applications
Measures the sound intensity in the workplace
Helps in differentiating between normal noise influences e.g. in a production hall and excessive noise
Data interface RS 232 standard, interface cable included
Delivered in a hard carrying case
Multi measuring functions:
- Lp: Standard sound level measuring function
- Leq: Energy equivalent sound level measuring mode Leq (type A)
- Ln: Shows the value as a percentage, as soon as the measured value exceeds a defined limit
Selectable methods of evaluation:
- A: As sensitive as the human ear
- C: Sensitive for noisier environmental conditions, where there are machines, plant, motors, etc.
- F: For areas where sound intensity does not vary
Function to set limits: Programmable target value for go / no-go test values. Noise and light output
TRACK function for continuous recording of variable environmental conditions
PEAK function to fix the current measured values
Internal memory for measured values, for 30 measurements. Can be displayed on the PC
Overall dimensions WxDxH 236x63x26 mm
Net weight approx. 0,17 kg

Download Product Data Sheet

Universal instrument to cater for a variety of applications
Applications in the environment (in the open air) using the remote Bi-Sensor (included)
- Temperature
- Humidity
Measurements inside machines and devices is possible using the cable sensor (included)
- Temperature
LCD display: Optimised for all industrial applications: With its bright contrast, also suitable for use in dark working conditions
Measures the temperature and the air humidity in the workplace
Allows you to determine whether the working conditions are too cold or too warm, or whether the humidity is within an acceptable range
Delivered in a hard carrying case
TRACK function for continuous recording of variable environmental conditions
HOLD function to fix the current measured values
MAX function to save the maximum values
MIN function to save the minimum values
Selectable measuring units: °C, °F (Temperature); %RH (Humidity)
Auto-Power-Off
Overall dimensions WxDxH 180x110x25 mm
Battery operation possible. Block battery (9V) included
Cable length or bi-sensor approx. 1.5 m
Cable length of cable sensor (K-Type) approx. 0,9 m
Net weight approx. 0,17 kg

Download Product Data Sheet

Measures illumination in the workplace
Helps to establish whether a workstation does has insufficient light or whether there is too much light
Photo sensor: Silicone diode
Cosine correction for light which falls at an angle
Sturdy protective cover for the photo sensor
Increased service life: Impact protection through a protective casing
Delivery in a robust box
TRACK function for continuous recording of variable environmental conditions
HOLD function to fix the current measured values
PEAK function to fix the current measured values
Selectable measuring units: lx, fc (footcandle)
Measuring frequency: 5 Hz
Cable length or sensor approx. 1 m
Overall dimensions WxDxH 180x110x25 mm
Battery operation possible. Block battery (9V) included
Net weight approx. 0,25 kg

Download Product Data Sheet

Measures illumination in the workplace
Helps to establish whether a workstation does has insufficient light or whether there is too much light
Photo sensor: Silicone diode
Sturdy protective cover for the photo sensor
Delivery in a robust soft box
TRACK function for continuous recording of variable environmental conditions
HOLD function to fix the current measured values
Measuring frequency: 5 Hz
Cable length or sensor approx. 1 m
Overall dimensions WxDxH 130x70x30 mm
Battery operation possible. Block battery (9V) included
Net weight approx. 0,17 kg

Download Product Data Sheet

Auto-Power-Off
Programmable high / low setpoints for go/no-go testing. Light and sound signal output
Data output to PC: USB output included
All measurement directions possible (360°) thanks to an automatic compensation function
Delivered in a hard carrying case
Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
Internal memory for up to 500 data groups (with up to 33 values per group forming the average value of the group)
Support rings for bended testing samples available. Please require.
Indicates: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL) and Tensile strength (Mpa)

Download Product Data Sheet

Auto-Power-Off
All measurement directions possible (360°) thanks to an automatic compensation function
Delivered in a hard carrying case
Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
Support rings for bended testing samples available. Please require.
Internal memory for up to 100 data groups (with up to 32 values per group forming the average value of the group)
Indicates: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL) and Tensile strength (Mpa)
Automatic unit conversion: The measuring result is automatically converted into all specified hardness units

Download Product Data Sheet

Auto-Power-Off
Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
All measurement directions possible (360°) thanks to an automatic compensation function
Wireless IR printer included for on-site printing of measurement protocols (battery operated)
Support rings for bended testing samples available. Please require.
Data output to PC: USB output included
Delivered in a hard carrying case
Internal memory for up to 800 data groups (with up to 99 values per group forming the average value of the group)
Indicates: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL) and Tensile strength (Mpa)

Download Product Data Sheet

Auto-Power-Off
Delivered in a hard carrying case
Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
Data output to PC: USB output included
Support rings for bended testing samples available. Please require.
All measurement directions possible (360°) thanks to an automatic compensation function
Internal memory for up to 9 data groups (with up to 9 values per group forming the average value of the group)
Indicates: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL) and Tensile strength (Mpa)
Automatic unit conversion: The measuring result is automatically converted into all specified hardness units

Download Product Data Sheet

Advanced handling: The all-in-one design allows to use the instrument in more and in broader applications as traditional instrument
As the instrument can be operated with one hand only, the user is more flexible and efficient in using the instrument
Modern LCD display: Optimized for industrial users: Bright for comfortable reading in dark surroundings (backlight) and high in contrast, so it can be read from any angle
USB-PC connection: Easy to install at all PC types
Indicates: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL) and Tensile strength (Mpa)
Data Software allows to download the memorized data, provides statistics and can save to Excel
Test block not included

Download Product Data Sheet

For (Shore) hardness of plastics, leather etc.
Flexible height adjustment: 63 mm maximum height for the test object
Stroke length: 15 mm
Adjustable base plate for the correction of inhomogeneous test objects
Glass plate: Providing a higher base hardness and superior accuracy

Download Product Data Sheet

Auto-Power-Off
Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Control plate for calibration included
Typical application: measurement of the penetration (Shore)
Shore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
Shore C/0: foam, sponge, etc.
Shore D: plastics, formica, epoxides, plexiglass, etc.
Delivered in a hard carrying case

Download Product Data Sheet

Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Typical application: measurement of the penetration (Shore)
Delivered in a wooden carrying case
Shore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
Shore C/0: foam, sponge, etc.
Shore D: plastics, formica, epoxides, plexiglass, etc.

Download Product Data Sheet

Delivered in a hard carrying case
Programmable high / low setpoints for go/no-go testing. Light and sound signal output
Base plate included
External sensor for better access to the test object (cable length: 1 m)
Scan mode allows continuous measurement or single point measuring mode
Height displayed in mm or inch
Internal memory for up to 20 files (with up to 100 values per file)

Download Product Data Sheet

Auto-Power-Off
Delivered in a hard carrying case
Height displayed in mm or inch
External sensor for better access to the test object (cable length: 1 m)
Scan mode allows continuous measurement or single point measuring mode
Internal memory for up to 20 files (with up to 100 values per file)

Download Product Data Sheet

Auto-Power-Off
External sensor for better access to the test object (cable length: 1 m)
Delivered in a hard carrying case
Height displayed in mm or inch
Base plate included

Download Product Data Sheet

Auto-Power-Off
External sensor for better access to the test object (cable length: 1 m)
Height displayed in mm or inch
Base plate included
Delivered in a hard carrying case

Download Product Data Sheet

Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
Delivered in a hard carrying case
Selectable measuring units: µm, inch (mil)
Base plate and calibration foils included
Min base thickness: 0.3 mm
Scan mode allows continuous measurement or single point measuring mode
Internal memory for up to 99 values
External sensor for better access to the test object (cable length: 1 m)

Download Product Data Sheet

Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
Delivered in a hard carrying case
Selectable measuring units: µm, inch (mil)
Base plate and calibration foils included
Min base thickness: 0.3 mm
Scan mode allows continuous measurement or single point measuring mode
Internal memory for up to 99 values

Download Product Data Sheet

Auto-Power-Off
Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
Overall dimensions WxDxH 131x65x28 mm
Net weight approx. 81 g
Base plate and calibration foils included
Min base thickness: 0.3 mm
External sensor for better access to the test object (cable length: 1 m)
Selectable measuring units: µm, inch (mil)
Delivered in a hard carrying case

Download Product Data Sheet

Auto-Power-Off
Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
Min base thickness: 0.3 mm
Selectable measuring units: µm, inch (mil)
Base plate and calibration foils included
Overall dimensions WxDxH 131x65x28 mm
Net weight approx. 81 g

Auto-Power-Off
Delivered in a hard carrying case
Selectable measuring units: µm, inch (mil)
Base plate and calibration foils included
External sensor for better access to the test object (cable length: 1 m)
Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
Net weight approx. 0,25 kg
Overall dimensions WxDxH 161x69x32 mm
Min base thickness: 0.3 mm

Download Product Data Sheet

Digital sliding calliper with a superior precision even at high operation speed
Easy mounting to tooling machines, conveyer, test stands, etc.
Zeroing, pre-added and pre-reduced length as well as switching the unit can be done manually
Data interface RS 232 standard, interface cable included
Height displayed in mm or inch

Download Product Data Sheet

Digital sliding calliper with a superior precision even at high operation speed
Easy mounting to tooling machines, conveyer, test stands, etc.
Zeroing, pre-added and pre-reduced length as well as switching the unit can be done manually.

Download Product Data Sheet

Measurement uncertainty: 0,2% of Max
Integrated printer (thermal)
Programmable high / low setpoints for go/no-go testing. Light and sound signal output
Digital length measuring unit
manual zero adjustment
pre-length is manually possible
read out: 0.01 mm
Up to 10 mesured results can be stored internally to be printed out or to calculate average values
Peak-Hold Function
Selectable measuring units: Newton, lbf, kg
Stroke length: 150 mm
Max testable length: 200 mm

Download Product Data Sheet

Measurement uncertainty: 0,2% of Max
Integrated printer (thermal)
Programmable high / low setpoints for go/no-go testing. Light and sound signal output
Digital length measuring unit
manual zero adjustment
pre-length is manually possible
read out: 0.01 mm
Up to 10 mesured results can be stored internally to be printed out or to calculate average values
Peak-Hold Function
Selectable measuring units: Newton, lbf, kg
Stroke length: 100 mm
Max testable length: 100 mm

Download Product Data Sheet

Programmable high / low setpoints for go/no-go testing. Light and sound signal output
Peak-Hold Function
Selectable measuring units: Newton, lbf, kg
Measurement uncertainty: 0,2% of Max
Digital length measuring unit
manual zero adjustment
pre-length is manually possible
read out: 0.01 mm
Integrated printer (thermal)
Up to 10 mesured results can be stored internally to be printed out or to calculate average values
Stroke length: 70 mm
Max testable length: 70 mm

Download Product Data Sheet

Speed accuracy:2 % of Max
Various possibilities for fixture mountings (see accessory)
Lowest starting point of the carriage above base plate: 171 mm
Maximum carriage height above base plate: 385 mm
Minimum distance between carriage and bottom of upper object mounting (X): 85 mm
Maximum travel (Y): 214 mm (automatic safety shutdown by limit switches)
Speed range: 0 - 230 mm/min (standard)
Capacity: up to 30.000 Newton
Force controlled automativ switchoff (teststop after achieving an adjusted limit load)
Repeat function for durability tests (multiple up and down, adjustable)

Download Product Data Sheet