PJ Boner Automation Services
Calibration, Weighing & Instrumentation Specialists Ireland

Products Page

Pages:

SEM1300 DIN Rail Mounted Power Supply

DIN RAIL MOUNTED POWER SUPPLY.
The SEM1300 is a DIN Rail mounted power supply that provides a regulated 24V DC output @ 250 mA from an AC supply ranging from (90 to 253) VAC (50 to 60) Hz.

Additional DescriptionMore Details

Ideally suited to powering 24 V process instrumentation and signal conditioning modules, the small size of the SEM1300 now enables many more units to be installed in a smaller space than was previously possible.

The high efficiency of the SEM1300 power supply and its very cool running operation ensures a lower ambient temperature rise and hence improved reliability.

- 90 to 253VAC Input 24VDC output
- Universal Input Supply
- High Packing Density 21mm Wide
- Cool Running

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

PD644 Javelin D High-Voltage DC Meter

PD644: Javelin D High-Voltage DC Meter
Description: High Voltage DC Meter
Input: 0-300 VDC
Display: 0.56″ (14 mm) Red LED 4 Digits
Case: 1/8 DIN, High Impact Plastic, Shallow Depth
Power: Universal 85-265 VAC or 12-36 VDC

Additional DescriptionMore Details

The Javelin D is easy to set up and program because
everything is done using the simple four-button programming
method. There are no jumpers, and no need to ever open the
case. After completing setup of one meter, additional meters
can be “cloned” using the time-saving Copy function

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

5541 – Repeater Power Supply

5541 – Repeater Power Supply

POWERS A 2/3 WIRE (4 TO 20) mA TRANSMITTER IN A HAZARDOUS AREA
REPEATS THE TRANSMITTER SIGNAL INTO THE SAFE AREA
ALSO SUITABLE FOR HART TRANSMITTERS
20 TO 35V DC POWER SUPPLY

Additional DescriptionMore Details

The 5541 provides a fully floating dc supply for energising a conventional 2 or 3 wire (4 to 20) mA transmitter which is located in a hazardous area, and repeats the current in another floating circuit to drive a safe area load. For smart 2 wire transmitters, the unit allows bi-directional communications signals superimposed on the (4 to 20) mA signal.


€0.00Price:
Loading Updating cart…

5544 – Dual Channel Repeater Power Supply

5544 – Dual Channel Repeater Power Supply

POWERS A 2/3 WIRE (4 TO 20) mA TRANSMITTER IN A HAZARDOUS AREA
DUAL CHANNEL
REPEATS THE TRANSMITTER SIGNAL INTO THE SAFE AREA
ALSO SUITABLE FOR HART TRANSMITTERS
20 TO 35V DC POWER SUPPLY

Additional DescriptionMore Details

The MTL 5544 provides fully floating dc supplies for energising two conventional 2 or 3 wire (4 to 20) mA or ‘smart’ transmitter located in a hazardous area, and repeats the current in other circuits to drive two safe area loads. For smart 2 wire transmitters, the unit allows bi-directional transmission of digital communications signals superimposed on the (4 to 20) mA signal so that the transmitter can be interrogated either from the operator station or by a hand held communicator.


€0.00Price:
Loading Updating cart…

MED2911 – HIGH PERFORMANCE DIN RAIL POWER SUPPLY

MED2911 – HIGH PERFORMANCE DIN RAIL POWER SUPPLY

(90 to 240)V AC Supply Voltage
24 VDC @ 1 Amp Output
Can Power Up To 40 2 wire (4 to 20) mA Loop Powered transmitters
UL, CE and CSA approved
Isolated to 3 kV

Additional DescriptionMore Details

The MED 2911 is a high performance switch mode power supply which is very small and compact for the power it delivers and which complements our range of DIN rail transmitters and Medacs signal conditioning units. It connects to the mains supply and provides an isolated 24 VDC supply @ 1A.


€0.00Price:
Loading Updating cart…
LoadingUpdating…

Copyright © 2014 P.J.Bonner