FEATURES
Initial Calibration Accuracy (6 months) to 0.0025% of Rdg. (voltage)
1-Year Accuracy to 0.005% of Rdg. (voltage)
Source/Read Thermocouple (13), RTD (9), Voltage, Current and Pressure (read only)
Custom RTD and SPRT Profiles
Nine Set points for Each Output Range and Type
24 VDC Loop Power
Direct Keyboard Entry
Beryllium-Copper Binding Posts Reduce Thermal EMFs
RS-232 and IEEE-488 Remote Control
Compatible with Fluke Met/Cal® Software
Isolated Measurement Channel
Selectable 250 ? HART® Resistor
Includes NIST Traceable Certificate with Calibration Data

Thermocouple, RTD, & Process Input
Universal Power Supply 100-240 VAC
Latching Relay High or Low Limit Control
1 Latching Relay & 1 Alarm Relay
Retransmitting 4-20 mA Output
RS-485 Serial Communications Option
Modbus® RTU/ASCII Communications
Free Operating & Data Logging Software
IP55 & IP65 Fronts
1/16 & 1/4 DIN Sizes
3 Year Warranty

FEATURES

Vacuum to 7,000 psi
High accuracy 0.05% FS Total Error Band
Available with 0.1% or 0.25% FS accuracy
5-digit LCD, % bar graph & battery level indication
Large 0.66" (16.7 mm) display in compact 3" case
Battery powered
Intrinsically safe, Class I, Div 1
Rugged & portable design
Stainless steel case & socket welded
Twelve engineering units
Max & Min pressure
Password protected

Menu Mode

Configuration Mode (CONFIG): Allows scrolling through configuration menus to select available options.
Engineering Units: psi, inHg, inH2O, ftSW, Bar, mBar, kPa, MPa, mmHg, cmH2O, mmH2O, kg/cm2
Display Update Rate: 4 settings: 10/sec, 5/sec, 2/sec, 1/sec
Auto Off: 5 settings: Never, 2, 5, 15, or 30 minutes
Backlight: 5 settings: On/off, 10 sec, 30 sec, 1 min, 5 min
Language: 7 Languages: English, Spanish, French, Italian, German, Portuguese, and Dutch.
Dampening: 5 settings: None, Average: 2, 4, 6, 8 readings
Contrast: 7 settings
Field Calibration: Zero & span (password protected)
Disable: Password allows lockout of configuration settings.
Zero Disable: Allows disabling of Zero button.

FEATURES

Vacuum to 7,000 psi
High accuracy 0.05% FS Total Error Band
Available with 0.1% or 0.25% FS accuracy
5-digit LCD, % bar graph & battery level indication
Large 0.66" (16.7 mm) display in compact 3" case
Battery powered
Intrinsically safe, Class I, Div 1
Rugged & portable design
Stainless steel case & socket welded
Twelve engineering units
Max & Min pressure
Password protected

Menu Mode

Configuration Mode (CONFIG): Allows scrolling through configuration menus to select available options.
Engineering Units: psi, inHg, inH2O, ftSW, Bar, mBar, kPa, MPa, mmHg, cmH2O, mmH2O, kg/cm2
Display Update Rate: 4 settings: 10/sec, 5/sec, 2/sec, 1/sec
Auto Off: 5 settings: Never, 2, 5, 15, or 30 minutes
Backlight: 5 settings: On/off, 10 sec, 30 sec, 1 min, 5 min
Language: 7 Languages: English, Spanish, French, Italian, German, Portuguese, and Dutch.
Dampening: 5 settings: None, Average: 2, 4, 6, 8 readings
Contrast: 7 settings
Field Calibration: Zero & span (password protected)
Disable: Password allows lockout of configuration settings.
Zero Disable: Allows disabling of Zero button.

Features
Digital gauge, pressure switch, & transmitter
Vacuum to 20,000 psi
0.25% FS Terminal Point Accuracy (0.13% BFSL)
5-digit LCD, % bar graph & battery level indication
Large 0.6" (15.2 mm) or 0.88" (22.4 mm) LCD
4-20 mA output & 2 Form C relays
Three case options: stainless steel, aluminum, or fiberglass reinforced thermoplastic
NEMA 4, IP65 case
Battery, loop, or 12-36 VDC powered
Intrinsically safe, Class I, Div 1
Password protected menus
Easy-to-use menu options
Five backlight settings
Twelve engineering units
Menu configure feature
Update rate
Dampen mode
Auto off

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total

Stand Alone Scaling (Internal or External)
These meters may be scaled without a signal source or calibrated with a signal source.

Lockout and Menu-Title Disabling

The ability to modify programming values can be restricted by installing a lockout jumper on terminals at the rear of the instrument. In addition, certain menu titles can be programmed not to appear during the menu scroll.

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total

Quick Overview

Input: RS-485 Modbus RTU
Display: 6-digit, 0.56" (14.2 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12-36 VDC
Operating Temperature: -40 to 65°C

Features

Master, slave, or snooper mode
2 form A relays
Linear, square root, or programmable exponent
RS-485 serial communications
Proxy polling for up to 8 process variables
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

2 form C relays
Isolated 4-20 mA transmitter output

Quick Overview

Input: Process: 0-20 mA , 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V)
Temperature: Thermocouple J, K, T, E; RTD 100 ? Pt
Display: 4-digit, 1.20" (30.5 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12-36 VDC
Operating Temperature: 0 to 65°C

Features

Sunlight readable display
Maximum/minimum display
Linear or square root with low-flow cutoff
Transmitter power option
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

2 relays or 4-20 mA analog output options
24 VDC transmitter power supply
Dual 24 VDC transmitter power supplies

Quick Overview

Input: Thermocouple J, K, T, E, R, S, B, N, C; RTD 100 ? Pt, 10 ? Cu,
120 ? Ni, 1,000 ? Pt; Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -20 to 65°C

Features

1° or 0.1° resolution
Averages up to 10 RTD sensors
Automatic cold junction compensation
Interlock relays (force on)
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Quick Overview

Input: Pulse, open collector, NPN, PNP, TTL, switch contact,
sine wave (coil), square wave; Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Displays rate and total simultaneously
5, 10, or 24 VDC flowmeter power supply
Gate function for rate display of slow pulse rates
4-20 mA output option converts the pulse input to an isolated
4-20 mA output
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Quick Overview

Input: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Start, batch, & stop with pause front panel buttons
Display batch total + rate, grand total, batch count or preset
Single or multi-stage batching with up to 8 relays
Automatic overflow correction
Manual control or automatic batching
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply
Grand total can count up or down

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Features

Displays rate and total simultaneously
Open channel flow with programmable exponent
Isolated 24 VDC @ 200 mA transmitter power supply
32-point linearization with free software
Total, grand total, or non-resettable grand total
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models ("H" model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.

Through-Glass SafeTouch® Buttons

The PD8 is equipped with up to four sensors that operate as through-glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, mechanical buttons located on the faceplate are used.

Modern, Sleek and Practical Enclosure

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2, Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

FEATURES
Modern, Sleek and Practical Enclosure
All models available with sunlight readable displays
Display Mountable at 0°, 90°, 180°, & 270° Degrees (Display models)
Explosion-Proof, IP68, NEMA 4X Enclosure
Models Available with ProVu®, Trident X2 , Snooper, or Vigilante® II Functionality
SafeTouch® Through-Glass Button Programming
Password Protection (Select models)
Modbus® RS-485 Serial Communications
Flanges for Wall or Pipe Mounting

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models ("H" model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.

FEATURES
4-20 mA Input
Modern, Sleek and Practical Enclosure
3½ Digits, 1" (25.4 mm) Display
Display Mountable at 0°, 90°, 180°, & 270° Degrees
Easy Calibration and Installation
Loop-Powered Backlight Option
1 V Drop (4 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

General
Display: 3½ digit LCD, 1" (25.4 mm); -1,999 to 1,999
Display Update Rate: 2.5 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation
Overrange: Display reads 1 on the left most digit
Programming Method: Four front mounted trim potentiometers accessed when the cover is removed.
Recalibration: Recommended at least every 12 months.
Normal Mode Rejection: 60 dB rejection ratio
Operating Temperature Range: -40 to 75°C
Storage Temperature Range: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Screw terminals accept 12 to 22 AWG wire
Enclosure: Explosion-proof die cast aluminum with glass window, 0.30% max copper content, corrosion resistant epoxy coating, color: blue. NEMA 4X, IP68. Two ¾" NPT threaded conduit openings. One ¾" NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½" to 2½" or DN 40 to 65 mm pipe mounting.
Overall Dimensions: 5.65" x 5.25" x 4.86" (144 mm x 133 mm x 124 mm) (W x H x D)
Weight: 5.00 lbs (80 oz, 2.27 kg)
Warranty: 3 years parts and labor

KEY FEATURES
Informative & Easy to Read Display

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7" high and shows 5 digits of flow rate. The lower display is 0.4" high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.

Through-Glass SafeTouch® Buttons

The PD6830 is equipped with four sensors that operate as through glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.

Modern, Sleek and Practical Enclosure

The first thing customers notice about a product is its enclosure and the ProtEX-RTP really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTP shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring and one ¾" NPT hole for flowmeter connection.

Wide Viewing Angle

Customers can't always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6830 is designed to be looked at.

FEATURES
4-20 mA Input Loop-Powered
5-Digit, 0.7" (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4" (10.2 mm) Lower Display
Loop or External DC-Powered Backlight Standard
SafeTouch® Through-Glass Button Programming
Password Protection
3.0 V Drop without Backlight
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
Linear, Square Root, or Programmable Exponent
Operates from -40 to 75°C
Rate in Second, Minute, Hour, or Day
Open Collector Pulse or Alarm Output

Modern, Sleek and Practical Enclosure
The first thing customers notice about a product is its enclosure and the ProtEX-RTA really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTA shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring.

Isolated Open Collector Output

The isolated open collector output on the PD6820 may be assigned for use with the alarm or totalizer (pulse output). The rating of the output is 30 VDC @ 150 mA max.

FEATURES
4-20 mA Input Loop-Powered
Modern, Sleek and Practical Enclosure
5-Digit, 0.7" (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4" (10.2 mm) Lower Display
SafeTouch® Through-Glass Button Programming
Password Protection
32-Point , Square Root, or Exponential Linearization
Loop or External DC-Powered Backlight Standard
3.0 V Drop (6.0 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

ADDITIONAL FEATURES
Password Protection
A 5-digit password prevents unauthorized changes to the programmed parameter settings. The lock symbol is displayed to show that settings are protected. If the meter is password protected, the meter will display the message LOCKED when the Menu button is pressed.

Alarm Indication
The PD6800 has high or low alarm indication. When in alarm, the display will flash, and a HI or LO symbol is displayed. The alarm has an adjustable deadband (the difference between the set and reset points). The alarm is acknowledged by pressing the ENTER/ACK button.

General:
Display: 0.6" (15.24 mm) LCD, 3½+ digits; -1999 to 2999
Display Update Rate: 2 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation.
Over-Range: Display Flashes 2999
Under-Range: Display Flashes -1999
Programming Method: 4 Front Panel Pushbuttons (behind glass). Magnet may also be used for programming; P/N PDA-MAG.
Noise Filter: Programmable HI, LOW, or OFF
Recalibration: Recalibration is recommended at least every 12 months.
Max/Min Display: Max/Min readings reached by the process are stored until reset by the user or until power to the meter is turned off.
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Normal Mode Rejection: 64 dB at 50/60 Hz
Operating Temperature: -40 to 75°C
Storage Temperature: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminals accept 12 to 22 AWG
Tightening Torque: Screw terminal connectors: 4.5 lb-in (0.5 Nm)
Enclosure: Explosion-proof cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X, IP68. Two ½" NPT threaded conduit openings. One ½" NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two mounting holes for 1.5" pipe or wall mounting.
Weight: 40 oz (1.13 kg)
Overall Dimensions: 4.30" x 4.27" x 3.62" (109 mm x 108 mm x 92 mm) (W x H x D)
Warranty: 3 years parts & labor

FEATURES
•4-20 mA Input
•3½+ Digit 0.6" Display
•Easy Four-Button Programming
•NEMA 4X Enclosure
•Programmable Noise Filter
•Loop-Powered Backlight Option
•Max/Min Display
•HART Protocol Transparent
•1.7 V Drop without Backlight
•CSA Certified for -40 to 75°C Operation
(-55 to 75°C with Heater Option)

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

•J, K, T, E, R, S, B, N, C Thermocouples
•100 or 1000 ? Platinum, 10 ? Copper, 120 ? Nickel RTDs
•1° or 0.1° Resolution
•Averages up to 10 RTD Sensors
•Automatic Cold Junction Compensation
•NEMA 4X, IP65 Front
•Universal 85-265 VAC or 12/24 VDC Input Power
•Large Dual-Line 6-Character Display, 0.60" & 0.46"
•Programmable Displays & Function Keys
•Sunlight Readable Display models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•RS-232, RS-485 Serial Communication Options
•Modbus® RTU Protocol Standard

BATCH CONTROL FEATURES
•Start/Pause/Stop, Change Batch with Front Buttons
•Display Batch Total, Rate, Grand Total, Count or Preset
•Single or Multi-Stage Batch Control (Up to 8 Relays)
•Automatic Overrun Correction
•Rate in Units per Second, Minute, Hour, or Day
•Automatic or Manual Batch Control
•Low or High Flow Alarms while Batching
•9 Digit Grand Total with Overflow Feature
•Count Up or Down with Each Batch
•Program and Control with a Computer
Using MeterView Pro

ADDITIONAL FEATURES
•PD6210: 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and
±10 V Inputs
•PD6310: Pulse, Open Collector, NPN, PNP, TTL, Switch
Contact, Sine Wave (Coil), Square Wave Inputs
•Large Dual-Line 6-Digit Display, 0.60" & 0.46"
•NEMA 4X, IP65 Front
•85-265 VAC or 12/24 VDC Input Power
•Sunlight Readable Display Models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232, & RS-485 Modules for Modbus® RTU

BATCH CONTROL FEATURES
•Start/Pause/Stop, Change Batch with Front Buttons
•Display Batch Total, Rate, Grand Total, Count or Preset
•Single or Multi-Stage Batch Control (Up to 8 Relays)
•Automatic Overrun Correction
•Rate in Units per Second, Minute, Hour, or Day
•Automatic or Manual Batch Control
•Low or High Flow Alarms while Batching
•9 Digit Grand Total with Overflow Feature
•Count Up or Down with Each Batch
•Program and Control with a Computer
Using MeterView Pro

ADDITIONAL FEATURES
•PD6210: 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and
±10 V Inputs
•PD6310: Pulse, Open Collector, NPN, PNP, TTL, Switch
Contact, Sine Wave (Coil), Square Wave Inputs
•Large Dual-Line 6-Digit Display, 0.60" & 0.46"
•NEMA 4X, IP65 Front
•85-265 VAC or 12/24 VDC Input Power
•Sunlight Readable Display Models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232, & RS-485 Modules for Modbus® RTU

Digital gauge, pressure switch, & transmitter
Vacuum to 20,000 psi
0.25% FS Terminal Point Accuracy (0.13% BFSL)
5-digit LCD, % bar graph & battery level indication
Large 0.6" (15.2 mm) or 0.88" (22.4 mm) LCD
4-20 mA output & 2 Form C relays
Three case options: stainless steel, aluminum, or fiberglass reinforced thermoplastic
NEMA 4, IP65 case
Battery, loop, or 12-36 VDC powered
Intrinsically safe, Class I, Div 1
Password protected menus
Easy-to-use menu options

Five backlight settings
Twelve engineering units
Menu configure feature
Update rate
Dampen mode
Auto off

Download Product Data Sheet

A backlight comes optional with this unit and can be set to either manual or auto off. The PD202 comes with a 2.5" diameter impact-resistant thermoplastic case. It is powered by 2 AAA alkaline batteries, which have a battery life of 500 hours. The PD202 operates in a temperature range of -10 to 60°C.

•Vacuum to 19,999 psi
•0.5% FS Terminal Point Accuracy
•4½ digit, 0.5" (12.7 mm) LCD
•Nine engineering units
•IP54 protective boot
•Battery powered

The Javelin D is easy to set up and program because
everything is done using the simple four-button programming
method. There are no jumpers, and no need to ever open the
case. After completing setup of one meter, additional meters
can be “cloned” using the time-saving Copy function

Download Product Data Sheet

User Friendly Menu Structure
To simplify programming, one menu handles all the setup
functions.
• Press the Menu button to enter or exit the Programming
Mode at any time.
• Press the Right arrow button to move to the next digit
during digit programming.
• Press the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.
• Press the Enter/Ack button to access a menu or to
accept a setting

Download Product Data Sheet

Main Operation Display
• PV window displays process variable
• SP window displays current set point
or Stop if no program is running
• Press the P1 button to run program 1
• Press the P2 button to run program 2
• Hold the RST button to stop a program
• LEDs to indicate the current program, relay
status, auto tuning, and program hold
• Press SET/ENT button to switch to the next
display window.

Download Product Data Sheet

The Nova Digital Controller has dual four-digit LEDs and can
display commonly used setup parameters defined by the user.
All programming of a Nova Digital Controller is done through
the front panel. No switches or jumpers are required.
Front Panel Buttons
Operating Display Navigation
To access additional display information without the need to
enter the setup menus, simply press the SET/ENT button.
Main Operating Display
• PV window displays process variable
• SP window displays set point
• Press the SET/ENT button to move to
the next display window

Download Product Data Sheet

The Vigilante II Alarm Annunciator can be programmed for
all common ISA sequences including A, F1A, F2A, F3A,
M, F1M. Selectable ISA -1 (Silence Button), -4 (No Lock-
In), and horn disable options. Two popular sequences are
detailed below.
Download Product Data Sheet

Demo Video:
Vigilante II 4 or 8-Point Annunciator

The Vigilante II can be programmed for multiple
sequences with first-out alarm indication. This feature
indicates the first point of failure of a system when multiple
alarms occur.

Download Product Data Sheet

Demo Video:
Vigilante II 4 or 8-Point Annunciator

The flowcomputer Model F127 has been
developed to calculate corrected differential
liquid volume at normal conditions for generic
products. A typical application is the measurement
of fuel consumption by engines for power
generators, e.g. on board ships and locomotives.
The usual difficulties encountered in such
applications include: pulsating flows, very low
consumption readings, vibration and high
ambient temperatures. These are all well catered
for in the design and operation of the F127.
The corrected volumetric flow in each line is
calculated using the thermal expansion
coefficient algorithm stored in the flowcomputer.
The reference temperature can be defined as
desired, e.g. 15°C, 20°C or 60°F

Download Product Data Sheet

The flowcomputer Model F126-EG has been
developed to calculate the gas volume at
normal conditions for generic products, in most
cases at 0°C (32 °F) and 1.013 Bar. If desired,
any other temperature or pressure can be set.
The corrected volumetric flow is calculated
using the equations stored in the flowcomputer
while a compressibility factor can be set to
approach a real gas behaviour. A wide selection
of options further enhance this models
capabilities, including Intrinsic Safety and full
Modbus communication.

Download Product Data Sheet

The PD6200 and PD6300 ProVu meters are 1/8 DIN flow rate/totalizers specifically designed for displaying flow rate
and total from flowmeters with analog or pulse outputs. These flow rate/totalizers are particularly well-suited for flow
applications because they can display flow rate and flow total at the same time, provide power to drive the flowmeter,
and display flow total, flow grand total, or non-resettable flow total on up to nine digits.

Download Product Data Sheet

The PD6200 and PD6300 ProVu meters are 1/8 DIN flow rate/totalizers specifically designed for displaying flow rate
and total from flowmeters with analog or pulse outputs. These flow rate/totalizers are particularly well-suited for flow
applications because they can display flow rate and flow total at the same time, provide power to drive the flowmeter,
and display flow total, flow grand total, or non-resettable flow total on up to nine digits.

Download Product Data Sheet

The ProVu meter boasts specifications and functionality that
clearly makes it one of the most advanced process meters
available. Its dual-line 6-digit display (999,999), advanced
math functions, function keys, and optional expansion modules
are only a few of the features you will find on the ProVu.
Front Panel Display
Precise, Accurate, and More Informative
ProVu’s large 0.6" main display will provide you with a highly
accurate and precise 6-digit view of your process. Its 24-bit A/D
is accurate to ±0.03% of calibrated span ±1 count.

Download Product Data Sheet

The PD865 Snooper is a digital panel meter that can be
programmed as a Modbus RTU Master, Slave or Snooper.
What Makes Snooper Mode Special?
In Snooper mode, the Snooper can sit anywhere on the Modbus
network and display any process variable on the bus. The special
thing about Snooper mode is you don’t have to change the
programming of the other devices on the network. You just program
the Snooper to listen for a specific address and register on the bus
and it constantly monitors that location and displays the PV on the
digital readout.

Download Product Data Sheet

It is housed in a shallow-depth, 1/8 DIN enclosure that features a
NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.

Process Inputs: 0-20 mA, 4-20 mA, 1-5 V, -10 to 10 V
Temperature Inputs: J, K, T, E TC; 100 ? Pt RTD
Display: 0.56" (14 mm) Red LED 4 Digits
Case: 1/8 DIN, High Impact Plastic, Shallow Depth
Power: 85-265 VAC or 12-36 VDC

Download Product Data Sheet

Test Drive the Trident Meter By Using the Online Virtual Meter Below:
Trident Virtual Meter

Inputs: J, K, T, E TC; 100 ? Pt RTD
Display: 0.56" (14 mm) Red LED 4 Digits
Case: 1/8 DIN, High Impact Plastic, Shallow Depth
Power: 85-265 VAC or 12-36 VDC

Download Product Data Sheet

This loop-powered flow rate totalizers allow you
to display flow rate and total just about anywhere. First, there’s
no AC or battery power to worry about because these meters are
completely loop-powered. Second, these meters operate in a wide
variety of lighting conditions because LCDs work great in bright
sunlight and the optional loop-powered backlighting works great
in dimly lit areas. Third, there are two types of enclosures to
choose from: NEMA 4X and explosion-proof.
• Alternating Rate/Total Display
• 0.5" High LCD
• 4-20 mA Input
• Linear or Square Root Input
• Noise Filtering
• Low-Flow Cutoff
• Non-Volatile Memory, No Battery Needed
• Isolated Open Collector Pulse Output
• Loop-Powered Backlighting Option

Download Product Data Sheet

This loop-powered flow rate totalizers allow you
to display flow rate and total just about anywhere. First, there’s
no AC or battery power to worry about because these meters are
completely loop-powered. Second, these meters operate in a wide
variety of lighting conditions because LCDs work great in bright
sunlight and the optional loop-powered backlighting works great
in dimly lit areas. Third, there are two types of enclosures to
choose from: NEMA 4X and explosion-proof.
• Alternating Rate/Total Display
• 0.5" High LCD
• 4-20 mA Input
• Linear or Square Root Input
• Noise Filtering
• Low-Flow Cutoff
• Non-Volatile Memory, No Battery Needed
• Isolated Open Collector Pulse Output
• Loop-Powered Backlighting Option

Download Product Data Sheet

Input: 4-20 mA @ 24 VDC Maximum.
Display: 1.0" (25.4 mm) high LCD, -1000 to +1999.
Calibration: Two-step; non-interacting zero and span.
Calibration: 4 mA input: -1000 to +1000;
20 mA between 20 to 2000 counts greater than 4 mA display.
Maximum Voltage Drop: 1 VDC @ 20 mA.
Accuracy: ±0.1% FS, ±1 count.
Display Update Rate: 2.5/second.
Connections: Screw terminal block.
Operating Temperature: -40 to 80°C.
Approval: The PD687-EX is FM Approved and CSA Certified as
explosion-proof for Class I, Division 1, Groups B, C, and D; dustignition
proof for Class II, Division 1, Groups E, F, and G;
and Class III hazardous (classified) locations.
Enclosure: Explosion-proof cast aluminum with glass window,
0.3% max. copper content, NEMA 3, 4, 7, and 9; IP66; suitable
for location in Class I, Division 1, Groups B, C, & D; Class II,
Groups E, F, & G, Class III hazardous outdoor (Type 4) locations.
One ¾" NPT hole provided.

Download Product Data Sheet

Input: 4-20 mA @ 30 VDC maximum
Display: 1.0" (25.4 mm) LCD, 3½ digits; 1999
Accuracy: ±0.1% FS ±1 count
Approvals: FM Approved & CSA Certified as intrinsically safe with
entity, for use in Class I, II, III, Division 1, Groups A, B, C, D, E, F,
& G; T-code = T4; hazardous locations. Non-incendive for use in
Class I, II, III, Division 2, Groups A, B, C, D, F, & G.
Entity Parameters: Vmax= 30 V, Imax = 175 mA,
Ci = 0 ?F, Li = 0 ?H, Pi = 1.3 W
FM Approved: Intrinsically Safe, Class I Zone 0
See Control Drawing LIM686-2 for complete installation instructions.
Decimal Point: User selectable
Calibration: Two-step; non-interacting zero and span
Calibration Range: 4 mA input: -1000 to +1000;
20 mA input: between 20 and 2000 counts > 4 mA display
Display Update Rate: 2.5/second
Maximum Input Current: 30 mA
Maximum Voltage Drop: 1 V @ 20 mA
Operating Temperature: PD686: -40 to 85°C
for Canadian installations -40 to 40°C.
Storage Temperature: -40 to 85°C
Relative Humidity: 0 to 90% non-condensing
Enclosure: Impact-resistant glass filled polycarbonate body, color:
gray; impact-resistant clear polycarbonate cover; NEMA 4X, IP67
Connections: Removable screw terminals accept 12 to 26 AWG
Conduit Hole: One ½” conduit hole provided; refer to Ordering
Information to specify conduit hole location; request models with
rear conduit hole (-X) for panel mounting applications.
Weight: 12 oz (340 g)
Warranty: 2 years parts & labor

Download Product Data Sheet

Input: 4-20 mA @ 30 VDC maximum
Display: 1.0" (25.4 mm) LCD, 3½ digits; 1999
Accuracy: ±0.1% FS ±1 count
Decimal Point: User selectable
Calibration: Two-step; non-interacting zero and span
Calibration Range: 4 mA input: -1000 to +1000
20 mA input: between 20 and 2000 counts > 4 mA display
Display Update Rate: 2.5/second
Maximum Input Current: 30 mA
Maximum Voltage Drop: 1 V @ 20 mA
Operating Temperature: -40 to 85°C
Storage Temperature: -40 to 85°C
Relative Humidity: 0 to 90% non-condensing
Enclosure: Impact-resistant plastic; body: gray ABS; cover: clear
polycarbonate; NEMA 4X, IP66/67
Connections: Removable screw terminals accept 12 to 26 AWG
Conduit Hole: One ½" conduit hole provided; refer to Ordering
Information to specify conduit hole location; request models with
rear conduit hole (-X) for panel mounting applications.
Weight: 12 oz (340 g)
Warranty: 2 years parts & labor

Download Product Data Sheet

Through significant innovation in technology and design,
we developed the Loop Leader® Series of loop-powered
rate/totalizers, which are loaded with standard features and
built for tough industrial environments.
Full Featured
Everything comes standard with these meters. The
competition may charge extra for loop-powered backlighting,
open collector output and programmable exponent capability,
but these and a host of other key features are standard on
these indicators.

Download Product Data Sheet

Through significant innovation in technology and design,
we developed the Loop Leader® Series of loop-powered
rate/totalizers, which are loaded with standard features and
built for tough industrial environments.
Full Featured
Everything comes standard with these meters. The
competition may charge extra for loop-powered backlighting,
open collector output and programmable exponent capability,
but these and a host of other key features are standard on
these indicators.

Download Product Data Sheet

Through significant innovation in technology and design,
we developed the Loop Leader® Series of loop-powered
rate/totalizers, which are loaded with standard features and
built for tough industrial environments.
Full Featured
Everything comes standard with these meters. The
competition may charge extra for loop-powered backlighting,
open collector output and programmable exponent capability,
but these and a host of other key features are standard on
these indicators.

Download Product Data Sheet

Through significant innovation in technology and design,
we developed the Loop Leader® Series of loop-powered
rate/totalizers, which are loaded with standard features and
built for tough industrial environments.
Full Featured
Everything comes standard with these meters. The
competition may charge extra for loop-powered backlighting,
open collector output and programmable exponent capability,
but these and a host of other key features are standard on
these indicators.

Download Product Data Sheet

Input: 4-20 mA @ 24 VDC maximum
Accuracy: ±0.05% FS ±2 counts
Decimal Point: User selectable
Calibration Range: 4 mA input: -5000 to +5000;
20 mA input: between 200 and 20000 above 4 mA input
Maximum Voltage Drop: 5.2 VDC @ 20 mA
Display Update Rate: 2.5/second
Operating Temperature: -20 to 65°C
Storage Temperature: -40 to 80°C
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminals accept 12 to 22 AWG
Warranty: 2 years parts & labor

Download Product Data Sheet

Input: 4-20 mA @ 24 VDC maximum
Accuracy: ±0.05% FS ±2 counts
Decimal Point: User selectable
Calibration Range: 4 mA input: -5000 to +5000;
20 mA input: between 200 and 20000 above 4 mA input
Maximum Voltage Drop: 5.2 VDC @ 20 mA
Display Update Rate: 2.5/second
Operating Temperature: -20 to 65°C
Storage Temperature: -40 to 80°C
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminals accept 12 to 22 AWG
Warranty: 2 years parts & labor

Download Product Data Sheet

Input: 4-20 mA @ 24 VDC maximum
Display: 0.5" (12.7 mm) LCD, 3½ digits; 1999
Accuracy: ±0.1% FS ±1 count
Decimal Point: User selectable decimal point
Calibration: 2 step; non-interacting zero and span
Calibration Range: 4 mA input: -500 to +500;
20 mA input: between 20 and 2000 above 4 mA display
Maximum Voltage Drop: 1.5 VDC @ 20 mA;
3.5 VDC @ 20 mA with backlight option
Display Update Rate: 2.5/second
Loop-Powered Backlight Option: Factory installed only. Powered
directly from the 4-20 mA loop, no batteries required. The display
brightness will increase as the input signal current increases.
Connections: Removable screw terminals accept 12 to 22 AWG

Download Product Data Sheet