PJ Boner Automation Services
Calibration, Weighing & Instrumentation Specialists Ireland

Signal Conditioners

SEM1000 Loop Isolator

(4 to 20) mA LOOP ISOLATOR.
The SEM1000 isolator is designed to be series connected into a new or existing (4 to 20) mA current loop and provide an isolated (4 to 20) mA signal capable of driving into 500 ohm.

The output is powered from the input loop.

Additional DescriptionMore Details

- 10 Year Warranty
- 12.5mm Wide
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1010 Power Supply Isolator

COMMON POWER SUPPLY ISOLATOR.
The most common use of the SEM1010 is to provide isolation between a field mounted, two wire, (4 to 20) mA transmitter and a PLC type device with a common power supply.

Additional DescriptionMore Details

The two wire transmitter connected to the input terminals of the SEM1010 does not require a power supply. The supply required to drive the transmitter is obtained from the power supply connected to the output terminals.

Total isolation is maintained between the power supply on the output and the two wire transmitter.

- Provides (4 to 20) mA isolation from a common power supply
- 10 Year Warranty
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1015 Voltage to Current Convertor

VOLTAGE TO CURRENT CONVERTOR.
The SEM1015 is a (4 to 20) mA isolator that can be configured to accept most of the common voltage ranges found in both commercial and industrial applications.

Additional DescriptionMore Details

The isolator range can be specified at time of order, but if required the user may re-range the transmitter to a new range.

The isolator is housed inside a plastic enclosure, suitable for DIN Rail mounting.

Screw terminals are provided for wire connections.

The enclosure provides side entry access to coarse offset and span adjusters and a range select switch.

- Accepts any DC Voltage input between 0/100VDC
- 10 Year Warranty
- 12.5 mm Wide
- Can be used as adder or subtractor
- High Accuracy
- Galvanic Isolation

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1020 Loop Booster

(4 to 20) mA LOOP BOOSTER.
The SEM1020 is a cost effective isolator requiring power supply connections on both the input and output terminals.

Additional DescriptionMore Details

If true isolation is to be maintained, the two power supplies used must be fully isolated from each other.

The most common use for the SEM1020 is to provide extra drive capabilities from an existing (4 to 20) mA current loop.

The input circuitry only drops 2.7 V from the existing current loop and providing a 24 V isolated power supply is used on the output side, the isolator will drive up to 900 ohms.

- 10 Year Warranty
- 12.5 mm wide
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1200 Signal Splitter

(4 to 20) mA SIGNAL SPLITTER.
The SEM1200 is a cost effective isolator that provides two isolated (4 to 20) mA outputs from a single (4 to 20) mA input.

Additional DescriptionMore Details

The output loops must be powered externally.

-10 Year Warranty
- Provides 2 isolated (4 to 20) mA outputs from 1 (4 to 20) mA input
- High Accuracy
- 12.5 mm Wide
- Galvanic Isolation


€0.00Price:
Loading Updating cart…

SEM1603i Signal Isolator/Convertor

PROGRAMMABLE PROCESS SIGNAL ISOLATOR / CONVERTOR.
The SEM1603i is a DIN Rail process current convertor. It accepts any input between (-10 to 25) mA, even inverted inputs and provides the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

Additional DescriptionMore Details

Designed for ease of use, the SEM1603i is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the existing configuration data and perform any changes you wish to make to the configuration. To further help save time, the SEM1603 and module do not need to be wired to a power supply during the configuration process, both are powered by the USB interface on your PC.

- Configuration using USB port powered configurator
- Accepts any mA input between (-10 to 25) mA
- Isolated input
- Can be used as a loop booster, input signal converter, inverter
- (4 to 20) mA two wire output
- 10 year warranty

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1700 Universal Powered Smart Signal Conditioner

UNIVERSAL POWERED SMART SIGNAL CONDITIONER

The SEM1700 is a new generation DIN rail mounted universal signal conditioner from Status Instruments. It has been designed to accept most common process and temperature sensor inputs and provide the user with a programmable current or voltage output signal plus dual trip relays. Isolation is provided between input, outputs and supply. All temperature ranges are linear to temperature. Both input and output loop excitation is provided as well as a fully universal power supply.

Additional DescriptionMore Details

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1700 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1700 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

- Simple Configuration Via USB Port
- Universal Rtd, Thermocouple, Mv, V, MA and Potentiometer Input
- Isolated Universal Voltage or Current Output
- Dual C/O Relay Trip Outputs
- 22/250V AC or DC power supply
- User Trim / User Manual Configuration
- Powers both input and output current loops

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

SEM1636 loop powered trip amplifer

The SEM1636 monitors a (4 to 20) mA loop and provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range. The SEM1636 requires no additional power connection as power is derived from the (4 to 20) mA loop. Trip outputs are independently configured for action and set point, dead band. Six actions are provided normal High/Low/Deviation and inverted High/Low/Deviation. Additional math filter and user linearisation functions are provided.Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1636 and your PC. Using our free configuration software, the user can configure the device to the required application. To further help save time, the SEM1636 does not need to be wired to a power supply
during the configuration process, it is powered via the USB interface from your PC.


 

Additional DescriptionMore Details

DUAL TRIP OUTPUT WITH INDEPENDENT SET ACTIONS
POWERED FROM (4 to 20) mA LOOP – VOLTAGE BURDEN 5 VOLTS
TRIP RATING 250V AC 1A ; 30V DC 1A
NORMAL AND INVERTED LOW/HIGH/DEVIATION TRIP ACTIONS
OPTIONAL FILTER AND USER LINEARISATION FUNCTIONS
LED TRIP INDICATION, FAIL ON OR FAIL OFF TRIP ACTIONS
CONFIGURATION USING USB PORT


€0.00Price:
Loading Updating cart…
LoadingUpdating…

Copyright © 2014 P.J.Bonner