DUAL TRIP OUTPUT WITH INDEPENDENT SET ACTIONS
POWERED FROM (4 to 20) mA LOOP – VOLTAGE BURDEN 5 VOLTS
TRIP RATING 250V AC 1A ; 30V DC 1A
NORMAL AND INVERTED LOW/HIGH/DEVIATION TRIP ACTIONS
OPTIONAL FILTER AND USER LINEARISATION FUNCTIONS
LED TRIP INDICATION, FAIL ON OR FAIL OFF TRIP ACTIONS
CONFIGURATION USING USB PORT

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.

The unit is microprocessor based and the displayed process range is achieved by means of three push button switches located on the underside of the module following a simple menu structure.

The product can be temperature probe mounted and is suitable for Styles 2, 4,5 and 9 or surface mounted and is powered from an existing current loop so no extra wiring is required. Any one of our IS approved temperature transmitters can be fitted in the base of the SCH4 enclosure, or it can be used to provide a digital readout of the process variable being measured from an existing current loop.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The MED 2911 is a high performance switch mode power supply which is very small and compact for the power it delivers and which complements our range of DIN rail transmitters and Medacs signal conditioning units. It connects to the mains supply and provides an isolated 24 VDC supply @ 1A.

The MTL 5544 provides fully floating dc supplies for energising two conventional 2 or 3 wire (4 to 20) mA or ‘smart’ transmitter located in a hazardous area, and repeats the current in other circuits to drive two safe area loads. For smart 2 wire transmitters, the unit allows bi-directional transmission of digital communications signals superimposed on the (4 to 20) mA signal so that the transmitter can be interrogated either from the operator station or by a hand held communicator.

The 5541 provides a fully floating dc supply for energising a conventional 2 or 3 wire (4 to 20) mA transmitter which is located in a hazardous area, and repeats the current in another floating circuit to drive a safe area load. For smart 2 wire transmitters, the unit allows bi-directional communications signals superimposed on the (4 to 20) mA signal.

The SEM110P accepts a Pt100 platinum resistance temperature sensor to BS1 904 or DIN 43760 standards or a thermocouple K, T, J, R or S and converts the sensor temperature to a current varying between 4 and 20 mA. Version are also available for slide wired (W), variable resistor (Z) or temperature deferential (D). The same two wires that power the transmitter also carry the transmission current such that only two connections are required. This drastically reduces installation and wiring costs whilst the nature of current transmission provides superb nose immunity and ensures that line impedance's, thermoelectric effects etc. do not introduce errors.

Transmitters are factory calibrated to the desired range within the accuracy stated, however, SPAN and ZERO potentiometers are available for periodic recalibration or for 'tweaking' out sensor errors when used with two wire or low grade detectors.

The WRX900 receiver is used together with the WTX700 in head temperature transmitter for wireless
temperature measurement. The product converts the measured temperature values received into isolated
current or voltage signals (0(4) to 20) mA, (0 to 10V) as well as making them available via a digital RS485
interface. The WRX900 will accept wireless signals from up to 16 WTX700 in head transmitters. Any one of
the temperature values received can be linked to any one of the analogue or relay outputs and all are
available via the RS485 digital interface.

Download Product Data Sheet

The WTX700 series in head temperature transmitter is a new generation of wireless temperature measurement solutions from Status Instruments. It has been designed to accept most common temperature sensors including those from RTD and thermocouple sensors as well as slidewire and mV signals. The measured value is transmitted to the DIN Rail mounted base station (WRX900), this can accept signals from up to 16 WTX700 transmitters.

Download Product Data Sheet

Welded 316 ST/STEEL construction for screw fitting into process
connections or STW series pockets (except style 2).
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½" BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)

Download Product Data Sheet

316 Stainless Steel
Sealed to IP67
33mm Mounting Holes for Transmitter and Connection Blocks
Height 65mm
Swing Diameter 78mm

Download Product Data Sheet

Moulded in general purpose ABS, the
external fixing points provide a simple and rapid means of mounting sensors directly onto ducts, dispensing with the
need for separate mounting plates.
The unit is supplied fully assembled and consists of a body, cap, locking nut and sealing rings. Accessories include, a
cap retaining chain or strap, clip in blanking plugs, OEM labels and mounting kits. The unit can also be supplied in
separate parts. The only tool required for assembly is an 8 mm Allen Key.

Download Product Data Sheet

Polished Stainless Steel Construction
M16 x 1.5 entries
Wall or Temperature Probe Mount Versions
Sealed to IP67
For use with DM640/SEM710 series

Download Product Data Sheet

The SCH4 series of probe connection heads has a wide range of entry sizes and positions. The head will accept standard
connecting blocks and most standard head mounting transmitters. It also has two pillars for self tapping screws which
enable a low cost terminal block to be fitted for Energy Management applications. Moulded in general purpose ABS, the
external fixing points provide a simple and rapid means of mounting sensors directly onto ducts, dispensing with the
need for separate mounting plates.
The unit is supplied fully assembled and consists of a body, cap, locking nut and sealing rings. Accessories include, a
cap retaining chain or strap, clip in blanking plugs, OEM labels and mounting kits. The unit can also be supplied in
separate parts. The only tool required for assembly is an 8 mm Allen Key.

Download Product Data Sheet

Suitable for Pt100,Ni100,Cu53,Cu100 temperature sensors
20 mm LCD Display for good readability
Max/Min Process Temperature
Sensor, Wall or Panel Mount Housing Options
Stainless Steel Construction (100 mm diameter)
IP65 Enclosure

Download Product Data Sheet

Suitable For Use With Pt100 or Thermocouple Temperature Probes
Battery powered
Sensor,Remote or Wall Mounted versions
Push button configurable
4 digit display
Sealed to IP67
Atex approved in ABS housing

Download Product Data Sheet

Update time 200 mSResponse Time 0.5 seconds
Start up time 1 seconds ( Vout 0.0 V duringstart up)
Power Supply (12 to 30) Volts dc
Warm-up Time 1 Minute
Download Product Data Sheet

Update time 200 mS
Response Time 0.5 seconds
Start up time 4 seconds ( I out < 4 mA duringstart up)
Warm-up time 1 minute to full accuracy
Power Supply (8 to 30) Volts dc
Download Product Data Sheet

All welded 316 ST/STEEL sensor for screw fitting into process connections or
STW series pockets. Designed to be used with the Status SCH4 connecting head
or the DM400/500 local indicators it features a “running nut” head which
enables the indicator to be orientated to the optimum viewing position.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75,100,150,200,250 immersion
Process Thread ½” BSP parallel
Extension 9.5 dia x 75 long
Head Thread M16 x 1.5
Tails 3 wire 7.0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)

Download Product Data Sheet

Square aluminium block, strap-on-sensor with flying lead for clamping
directly to pipes.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath ¼ ” square x 50 long
Extension 4.0 dia x 19 long
Cable 3 wire 7/0.2 Cu PTFE insulated, 1 m long
Temp Range (-50 to 200) °C (at tip)

Download Product Data Sheet

Flying lead sensor with 316 ST/STEEL sheath for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Cable 3 wire 7/0.2 Cu PTFE insulated, 1 m long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet

All welded 316 ST/STEEL construction combined inset sensor and pocket.
This sensor is designed to be used with a spring mounting kit fitted to the
transmitter or terminal block to provide faster response times. The type
of transmitter/terminal block and connecting head required must be
specified when ordering.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 7.9 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½” BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip

Download Product Data Sheet

All welded 316 ST/STEEL construction sensor for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip).

Download Product Data Sheet

Welded 316 ST/STEEL construction for screw fitting into process
connections or STW series pockets (except style 2).
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½" BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet

The PTX23 is ideal for applications measuring depth and levels in; aggressive fluids, chemicals, and waste water.

Ranges are to DIN standard (in ratios of 1, 1.6, 2.5, 4, 6,) e.g. 100, 160, 250, 400, 600 mbars and 1, 1.6 bars etc. up to 25 bar with custom calibrations available to all pressure measurement units.

- Chemical Resistant
- ± 0.5 % FS Accuracy
- Captive Sealed Lead
- Lightening Protection Option
- Weighted Option

Download Product Data Sheet

This new technology allows for accurate process measurements, is extremely reliable, and offers excellent long-term stability. The sensor is very durable and moisture resistant.

The “Humi-chip” module that incorporates the sensor can be easily interchanged without the need for re-calibration.

For further operator ease of use, relative humidity values can be displayed on the optional integrated LCD display, or sent via analogue outputs to other display devices.

- 4/20mA or 0/10V output
- 24v AC /DC power supply
- Wall, duct remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

The SEM165 probe operates from (-30 to 140) °C.

Single hole mounting via a ¼" BSP pressure gland allows for simple installation into ducts pipes or process chambers and facilitates adjustment of insertion depth. The Status SCH4 terminal head is sealed to IP65 with cable entry via an M20 cable gland. High temperature RH probe operation option from (-30 to 140) °C and presents a versatile solution for the majority of humidity and temperature control applications.

- Duct mount
- Measures up to 140 Deg C
- Stainless Steel Probe
- Rapid response
- Humidity or temperature display option

Download Product Data Sheet

The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, available on our website, PC configuration allows you to measure any one of these 4 on any two parameters.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate
either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

- Measures humidity, temperature, dewpoint or delta t
- Dual channel 4/20 output for any two of the above
- Programmable using USB powered configurator
- Duct, Wall or remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, available on our website, PC configuration allows you to measure any one of these 4 parameters on the SEM161.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitter to the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate
either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM161 Series can be ordered for duct, wall or remote sensor mounting.

- Measures humidity, temperature, dewpoint or delta t
- Single channel 4/20 output for any one of the above
- Programmable using USB powered configurator
- Duct, Wall or remote mount versions
- Display option
- Interchangeable digital sensor

Download Product Data Sheet

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1700 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1700 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

- Simple Configuration Via USB Port
- Universal Rtd, Thermocouple, Mv, V, MA and Potentiometer Input
- Isolated Universal Voltage or Current Output
- Dual C/O Relay Trip Outputs
- 22/250V AC or DC power supply
- User Trim / User Manual Configuration
- Powers both input and output current loops

Download Product Data Sheet

The SEM315 has full HART communications protocol which allows the user to quickly and easily down-load information or interrogate the device enabling the following:-

- Simple re-ranging of sensor type and range
- Easy on site re-calibration
- Self documentation
- Operation with proprietary software packages such as AMS Plant Web™ and Cornerstone™
- Remote configuration on the (4 to 20) mA loop with a hand held communicator or with a PC & HART modem
- Online Digital communication concurrent with a (4 to 20) mA Analogue signal.
All the standard HART universal and common usage commands are fully implemented, with other device specific commands that enable access to the enhanced performance parameters of the SEM315.

- 10 Year Warranty
- HART® Protocol
- Universal Input
- Sensor Burnout Detect
- Isolation to 500 VAC

Download Product Data Sheet

Designed for ease of use, our USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1610 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1610 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

The software allows the user to set factory default settings.

The SEM1610 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.

As the SEM1610 case design is based on the DIN43880 standard, a wide range of are available to the user, offering both visible and user access to the front panel functions.

- Simple USB Configuration Port
- Universal Pt100,Thermocouple, mV, mA Input
- Push Button User Trim
- 4/20mA two wire Output
- 10 Year Warranty

Download Product Data Sheet

Designed for ease of use, this range is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the current configuration data, and then perform any changes you wish to make to the configuration. To further help save time, the SEM1603 and configuration module do not need to be wired to a power supply during the configuration process, both are powered by the USB interface on your PC.

- Configuration using USB port powered configurator
- Thermocouple / mV
- Isolated input
- Input linear to temperature
- (4 to 20) ma two wire output
- 10 year warranty

Download Product Data Sheet

Designed for ease of use, this range is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the current configuration data, and then perform any changes you wish to make to the configuration. To further help save time, the SEM1603 and configuration module do not need to be wired to a power supply during the configuration process, both are powered by the USB interface on your PC.

- Configuration using USB port powered configurator
- PT100 input
- Isolated input
- Input linear to temperature
- (4 to 20) ma two wire output
- 10 year warranty

Download Product Data Sheet

A simple push button operation allows the user to select TC type, Burnout direction, Select fixed ranges and trim 4 and 20 mA points. The SEM213TC transmitter incorporates the latest digital technology to ensure accurate drift free performance.

If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be supplied at the default range of (0 to 1000) °C type K.

K, J, N, E, T, R, S Thermocouples Plus mV

- Simple Push Button Configuration
- Advanced User Config for Access to 56 Pre Set Temperature Ranges
- User Push Button Trim
- Programmable Burnout

Download Product Data Sheet

A simple push button operation allows the user to select RTD type, Burnout direction, Select fixed ranges and trim 4 and 20 Ma points.

The SEM213P transmitter incorporates the latest digital technology to ensure accurate drift free performance.

If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be supplied at the default range of (0 to 100) °C type Pt100 IEC.

- Pt100 (3 Types), Ni100, Ni120, Cu100, Ohms (10 To 400_)
- Simple Push Button Configuration
- Advanced User Config For Access To 56 PreSet Temperature Ranges
- User Push Button Trim
- Programmable Burnout

Download Product Data Sheet

Ideally suited to powering 24 V process instrumentation and signal conditioning modules, the small size of the SEM1300 now enables many more units to be installed in a smaller space than was previously possible.

The high efficiency of the SEM1300 power supply and its very cool running operation ensures a lower ambient temperature rise and hence improved reliability.

- 90 to 253VAC Input 24VDC output
- Universal Input Supply
- High Packing Density 21mm Wide
- Cool Running

Download Product Data Sheet

Designed for ease of use, the SEM1603i is configured with our USB port powered configuration module. The module interfaces a PC USB port to the SEM1603, using the (4 to 20) mA loop to communicate. Using our free configuration software, you will be able to read the existing configuration data and perform any changes you wish to make to the configuration. To further help save time, the SEM1603 and module do not need to be wired to a power supply during the configuration process, both are powered by the USB interface on your PC.

- Configuration using USB port powered configurator
- Accepts any mA input between (-10 to 25) mA
- Isolated input
- Can be used as a loop booster, input signal converter, inverter
- (4 to 20) mA two wire output
- 10 year warranty

Download Product Data Sheet

The output loops must be powered externally.

-10 Year Warranty
- Provides 2 isolated (4 to 20) mA outputs from 1 (4 to 20) mA input
- High Accuracy
- 12.5 mm Wide
- Galvanic Isolation

If true isolation is to be maintained, the two power supplies used must be fully isolated from each other.

The most common use for the SEM1020 is to provide extra drive capabilities from an existing (4 to 20) mA current loop.

The input circuitry only drops 2.7 V from the existing current loop and providing a 24 V isolated power supply is used on the output side, the isolator will drive up to 900 ohms.

- 10 Year Warranty
- 12.5 mm wide
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet

The isolator range can be specified at time of order, but if required the user may re-range the transmitter to a new range.

The isolator is housed inside a plastic enclosure, suitable for DIN Rail mounting.

Screw terminals are provided for wire connections.

The enclosure provides side entry access to coarse offset and span adjusters and a range select switch.

- Accepts any DC Voltage input between 0/100VDC
- 10 Year Warranty
- 12.5 mm Wide
- Can be used as adder or subtractor
- High Accuracy
- Galvanic Isolation

Download Product Data Sheet

The two wire transmitter connected to the input terminals of the SEM1010 does not require a power supply. The supply required to drive the transmitter is obtained from the power supply connected to the output terminals.

Total isolation is maintained between the power supply on the output and the two wire transmitter.

- Provides (4 to 20) mA isolation from a common power supply
- 10 Year Warranty
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet

- 10 Year Warranty
- 12.5mm Wide
- High Accuracy
- Galvanic Isolation
- High Reliability

Download Product Data Sheet

The DM720 is housed in a 48x24mm DIN standard panel mount case and provides 10mm high LED digits . The engineering range is programmed by using easily accessible push buttons. The design of the product means no external power supply is needed and it requires less than 5V from the current loop.

- Push button programmable
- Compact 48 x 24mm
- Loop powered
- 4 digit LED display
- IP65 front panel seal
- 3 year warranty

Download Product Data Sheet

The DM3600 is available in two models. The DM3600U which is a universal input panel indicator and the DM3600A, a universal panel indicator with totaliser functions.

All functions are programmable via the integral front panel keys or via the optional RS485 serial communications port using the Modbus protocol. To facilitate integration into a Scada system, an OPC server is available which also interfaces to the MEDACS, smart DIN rail Signal Conditioner product range, seamlessly integrating front and back of panel instruments.

The DM3600 supports TFML (Transfer Function Module Library) i.e. the ability to download custom functionality by means of standard modules available from the web site. This allows pre-written or custom control functions to be quickly and easily incorporated.

The DM3600A totaliser function enables non-volatile storage of the integrated total to be maintained within the unit, even after loss of power. Output options can be selected to operate on Process Variable (PV) or Total.

- Universal Input
- Flow Totaliser Functions
- 6 Digit Display
- Programmable Relay & Current Outputs
- RS485 Serial MODBUS comms
- IP65 Sealed Front
- Internal Power Supply for Loop Exitation
- Custom Software For Your Application Option
- Programmable Via The Front Panel Or Remote PC
- User Non Linear Function For Tank Level Applications

Download Product Data Sheet

The unit is microprocessor based and set up is achieved by means of three push button switches located on the underside of the module following a simple menu structure. The (4 to 20) mA loop powered indicator can have a number of standard linearisations applied, such as square root, or a custom characteristic can be entered. Rtd and Thermocouple versions can be combined with a (4 to 20) mA transmitter (two wire current sink) with the transmission range set from the push buttons.

The DM700 series can be fitted in a selection of enclosures to achieve IP67 sealing.

A unique feature of the RTD input is the ability to enter sensor calibration data to achieve an exact match for greatest accuracy.

- Suitable for Sensor or Surface Mounting
- 10 Year Warranty
- 4 Digit LED Display
- Custom Linearisation
- Fully Programmable by Push Buttons
- Loop Powered
- ATEX Version available

Download Product Data Sheet

Engineering units are configured using Coarse and Fine adjustments, which are provided for both Zero and Span.

The circular stainless steel housing is available in a choice of depths, permitting the installation of a suitable loop-powered transmitter.

A selection of compatible temperature sensors are available with various immersion lengths and process connections.

- Large 20 mm LCD Display
- Loop Powered
- Only 1 Volt from Loop
- Stainless Steel Case
- IP65 Enclosure

Download Product Data Sheet

It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

-Simple configuration via USB port
- Isolated PT100, thermocouple input
- Display temperature in °C /°F or output drive in mA
- Push button user trim
- (4 to 20) mA two wire output
- Housing ABS plastic or stainless steel
- 10 year warranty

Download Product Data Sheet

The SEM310 has full HART communications protocol which allows the user to quickly and easily download information or interrogate the device.

A sensor referencing facility enables the transmitter to be accurately matched to a particular sensor.

- 10 Year Warranty
- HART Protocol
- Universal Input
- Versions for Hazardous Areas
- Sensor Burnout Detect
- Isolation to 500 VAC
- Spring Mounting

Download Product Data Sheet

Output range and other operating parameters are easily programmed using RCPW software running under "Windows" without the need for re-calibration.

Isolation is a standard feature to overcome any potential ground loop effects. Two microprocessors operate together to ensure error-free transmission across the isolation barrier.

A sensor referencing facility enables the transmitter to be accurately matched to a particular sensor.

- 10 Year Warranty
- Galvanically Isolated
- Universal Input
- Versions for Hazardous Areas
- High Accuracy and Stability
- Sensor Referencing
- Easily Re-programmed
- In Head Mounting

Download Product Data Sheet

PC configuration allows the user to select TC type, Range, units and Burnout direction, without requiring calibration equipment. Configuration is performed quickly using a our new USB port driven configurator by simply connecting two clips to the SEM206TC loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

The SEM206 TC in head transmitter incorporates the latest digital technology to ensure accurate drift free performance. If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of 0 to 1000 °C type K.

- K, J, N, E, T, R, S thermocouples plus mV
- Configuration using USB port powered configurator
- Isolated input
- Over range LED indication
- Programmable burnout

Download Product Data Sheet

PC configuration allows the user to select Range, units and Burnout direction, without requiring calibration equipment. Configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the SEM206/P loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

The SEM206/P in head transmitter incorporates the latest digital technology to ensure accurate drift free performance. If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of 0 to 100 °C

- Configuration using USB port powered configurator
- Configurable in seconds
- High stability
- Over range LED indication
- Programmable burnout
- 10 year warranty

Download Product Data Sheet

The SEM203 in-head transmitter incorporates the latest digital technology to ensure accurate drift free linearisation. It connects to an appropriate sensor and converts the output to a linear (4 to 20) mA output signal, providing a level of performance at a cost that was not possible with earlier analogue types.

High accuracy and stability coupled with the flexibility of reduced stock holding and the quick and easy way of bench re-ranging makes the SEM203 the ideal choice for the majority of temperature sensing requirements.

The SEM203 is linearised to temperature to comply with all common thermocouple types.

An on board LED indicates the successful completion of the range programming and also provides an instant indication of sensor health.

- K, J, N, E, T,R, S thermocouples plus mV
- Simple push button configuration
- Advanced user configuration for access to 56 pre-set temperature ranges
- Push button user trim
- Programmable burnout
- Galvanic Isolation
- 10 Year Warranty

Download Product Data Sheet

The SEM203 in-head transmitter incorporates the latest digital technology to ensure accurate drift free linearisation. It connects to an appropriate sensor and converts the output to a linear 4-20mA output signal, providing a level of performance at a cost that was not possible with earlier analogue types.

High accuracy and stability coupled with the flexibility of reduced stock holding and the quick and easy way of bench re-ranging makes the SEM203 the ideal choice for the majority of temperature sensing requirements.

The SEM203 is linearised to comply with all common RTD sensor standards i.e. 0.00385, 0.003916 etc. all common thermocouple types and 2252 ohms and 10k ohms YSI Thermistors, and up to 10k ohms potentiometers.

An on board LED indicates the successful completion of the range programming and also provides an instant indication of sensor health.

*Low Cost
*10 Year Warranty
*Push Button Calibration
*RTD, T/C, Slidewire or Thermistor Input
*Drift Free Linerisation
*Re-Rangeable without PC
*LED Over-Range Indication
*Galvanic Isolation on T/C Types

Download Product Data Sheet