PJ Boner Products Services
Instrumentation Ireland

Products Page

Pages:

SEM710 Temperature Transmitter

UNIVERSAL TEMPERATURE TRANSMITTER WITH INTEGRAL DISPLAY
The SEM710 is the first of a new generation head mounted temperature transmitter with display feature, from Status Instruments.

Additional DescriptionMore Details

It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

-Simple configuration via USB port
- Isolated PT100, thermocouple input
- Display temperature in °C /°F or output drive in mA
- Push button user trim
- (4 to 20) mA two wire output
- Housing ABS plastic or stainless steel
- 10 year warranty

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

TM100 Temperature Transmitter

Temperature Transmitter

Additional DescriptionMore Details

• Temperature transmitter type TM100.
• Measuring ranges from 0 to +50°C, -20 to +80°C, -50 to +50°C,
0 to 100°C (see “Configuration”)
• 0-10 V or 4-20 mA output, active sensor, power supply 24 Vac/Vdc (3-4 wires)
or 4-20 mA output , passive loop, power supply 18 to 30 Vdc (2 wires).
• ABS IP 65 and IP 30 housing, with or without display.
• Quick and easy mounting “1/4 turn” system on wall-mount plate.

Measuring range …………………………….0 to +50°C, -20 to +80°C, -50 to +50°C, 0 to +100°C
Units of measurement …………………..°C, °F
Accuracy * ……………………………………±0,5% of reading ±0,4°C
Response time ……………………………..1/e (63%) 5 sec. (ambient)
1/e (63%) 20 sec. (air tight)
Resolution ……………………………………0,1°C
Type of sensor………………………………Pt 100 class A as per DIN IEC751
Type of fluid………………………………….air and neutral gases

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

TH200 Humidity / Temperature Transmitter

Humidity / Temperature Transmitter

Additional DescriptionMore Details

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable intermediate ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro system interchangeable probes (PC or Stainless Steel)
• On-site calibration
• Simultaneous display of 2 parameters
• 2 outputs 4-20 mA or 0-10V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• ABS IP 65 housing, with or without 2-line backlit display.
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range……………………………0 to 100 %RH
Units of measurement……………………%RH
Accuracy*(Repeatability, linearity, hysteresis) ±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence………………±0.04 x (T-20)%RH (if T<15°C or T>25°C)
Response time ………………………………<10 sec. (from 10% RH to 80%RH, V =2m/s) air
Resolution …………………………………….0,1 %RH
Factory calibration uncertainty ………±0.88%RH
Type of sensor ………………………………capacitive
Type of fluid…………………………………..air and neutral gases (high resistance to solvents)

Temperature
Measuring range……………………………from -20 to +120°C ( polycarbonate probe)
from -40 to +180°C (st.steel probe)
Units of measurement……………………°C, °F
Accuracy *…………………………………….±0,3% of reading ±0,25°C
Response time……………………………… t = 9 sec. for V = 1 m/s 0,9 air
Resolution…………………………………….0,1°C
Type of sensor………………………………Pt 100 1/3 as per DIN IEC 751
Type of fluid ………………………………….air and neutral gases

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

TH300 Humidity / Temperature Transmitter

Humidity / Temperature Transmitter
Class 300 transmitters have 2 analogue outputs which correspond to the first 2 parameters displayed. You can activate 1 or 2 outputs, and for each output, you can choose between humidity, temperature and other functions.

Additional DescriptionMore Details

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer – 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
ALU or ABS housing
WITH or WITHOUT display
TH300
remote probe
TH300
standard
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer – 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range …………………………………0 to 100 % RH
Units of measurement …………………………% RH
Accuracy*(Repeatability, linearity, hysteresis) ……±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ……………………±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ……………………………………<10 sec. (from 10% RH to 80%RH, Vair=2m/s)
Resolution ………………………………………….0,1 % RH
Factory calibration uncertainty ……………±0.88%RH
Type of sensor ……………………………………capacitive
Type of fluid ………………………………………..air and neutral gases (high resistance to solvents)

Temperature
Measuring range …………………………………from -20 to +120°C (polycarbonate probe)
from -40 to +180°C (stainless steel probe)
Units of measurement …………………………°C, °F
Accuracy * ………………………………………….±0,3% of reading ±0,25°C
Response time …………………………………… t = 9 sec. for V = 1 m/s 0,9 air
Resolution ………………………………………….0,1°C
Type of sensor…………………………………….Pt 100 1/3 selon DIN IEC 751
Type of fluid………………………………………..air and neutral gases

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

Instrumentation & Automation Product Pages

Please Use The Menu ‘Products’ from the bar above to select what category you are looking for.

Example:
For Temperature:
Hover over ‘Products’, Hover over ‘Temperature’ Until a sub menu appears to the right of temperature. Then Select your product category from that menu.

Thanks!

€0.00Price:
Loading Updating cart…

PD765 Trident Process & Temperature Meter

The Model PD765 Trident digital panel meter is one of the most versatile digital panel meters on the market and will satisfy a wide variety of process applications. The Trident can be field programmed to accept process voltage (0-5V, 1-5V, etc) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples.

Additional DescriptionMore Details

It is housed in a shallow-depth, 1/8 DIN enclosure that features a
NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.

Process Inputs: 0-20 mA, 4-20 mA, 1-5 V, -10 to 10 V
Temperature Inputs: J, K, T, E TC; 100 ? Pt RTD
Display: 0.56″ (14 mm) Red LED 4 Digits
Case: 1/8 DIN, High Impact Plastic, Shallow Depth
Power: 85-265 VAC or 12-36 VDC

Download Product Data Sheet

Test Drive the Trident Meter By Using the Online Virtual Meter Below:
Trident Virtual Meter


€0.00Price:
Loading Updating cart…

STS Style1 Fixed Immersion Temp Probe

General purpose temperature probe, Fixed immersion length

Additional DescriptionMore Details

Welded 316 ST/STEEL construction for screw fitting into process
connections or STW series pockets (except style 2).
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½” BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet


€0.00Price:
Loading Updating cart…

STS Style2 Temperature Probe

General purpose temperature probe. Adjustable immersion length with compression gland

Additional DescriptionMore Details

All welded 316 ST/STEEL construction sensor for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip).

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

STS Style3 Temperature Probe

General purpose temperature probe with inset replaceable sensor

Additional DescriptionMore Details

All welded 316 ST/STEEL construction combined inset sensor and pocket.
This sensor is designed to be used with a spring mounting kit fitted to the
transmitter or terminal block to provide faster response times. The type
of transmitter/terminal block and connecting head required must be
specified when ordering.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 7.9 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½” BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip

Download Product Data Sheet


€0.00Price:
Loading Updating cart…

STS Style4 Temperature Probe

Remote mounted temperature probe

Additional DescriptionMore Details

Flying lead sensor with 316 ST/STEEL sheath for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Cable 3 wire 7/0.2 Cu PTFE insulated, 1 m long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet


€0.00Price:
Loading Updating cart…
LoadingUpdating…

Copyright © 2014 P.J.Bonner