PyroSight series sensors feature a variety of input, output, and alarm options to enable advanced process monitoring and control. Each sensor can be configured to operate as a stand alone sensor or with a remote Interface Module.

The sensor can be set to an analogue
(A) configuration for operation with a digital indicator, PID Controller, or PLC. In addition to providing an analogue output, the sensor may be configured for an alarm relay output (default) or a remote analogue input for adjustment of the sensor’s alarm set-point or emissivity.

Alternatively the sensor can be set to a digital (D) configuration (RS485) for operation with the Interface Module, a PC or a PLC.
The 1/4 DIN Interface Module includes an RS232 connector for interface with the PyroSight PC Software.

The SL50R Button Reader™ (available separately) interfaces to the USB port of a PC and is totally compatible with the user friendly, TempIT-Lite operating software which enables the logger to be set up and the data read and displayed in graphical format. Data can be stored and retrieved at a later time.

Although not essential, the software can be up-graded to TempIT-Pro which provides various additional features such as data table view, export data to spreadsheet, and automated MKT, F0, A0 and PU calculations etc. If needed, purchase TempIT-Pro from the related products on the right.

The SL51T is a member of the SL50 series, each model having specific advantages:

SL51T - Lowest cost, -40°C to +85°C measuring with ±1.0°C Accuracy

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set output range. Either fixed ranges or your own custom ranges can be configured for all output types in °C or °F.

The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters.

Using our popular SCH4 connection head, the SEM162 series can be ordered for duct, wall or remote sensor mounting.

The unit is microprocessor based and the displayed process range is achieved by means of three push button switches located on the underside of the module following a simple menu structure.

The product can be temperature probe mounted and is suitable for Styles 2, 4,5 and 9 or surface mounted and is powered from an existing current loop so no extra wiring is required. Any one of our IS approved temperature transmitters can be fitted in the base of the SCH4 enclosure, or it can be used to provide a digital readout of the process variable being measured from an existing current loop.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The highly innovative case design features option "Pods" which can be plugged in without dismantling or re-calibration. These provide optional outputs of programmable current and 2 x trip relays for alarm points.

The SEM110P accepts a Pt100 platinum resistance temperature sensor to BS1 904 or DIN 43760 standards or a thermocouple K, T, J, R or S and converts the sensor temperature to a current varying between 4 and 20 mA. Version are also available for slide wired (W), variable resistor (Z) or temperature deferential (D). The same two wires that power the transmitter also carry the transmission current such that only two connections are required. This drastically reduces installation and wiring costs whilst the nature of current transmission provides superb nose immunity and ensures that line impedance's, thermoelectric effects etc. do not introduce errors.

Transmitters are factory calibrated to the desired range within the accuracy stated, however, SPAN and ZERO potentiometers are available for periodic recalibration or for 'tweaking' out sensor errors when used with two wire or low grade detectors.

PC configuration allows the user to select TC type, Range, Filter, units, linearization and burnout direction, without requiring calibration equipment. Additionally, the user may read live process data when connected to the PC, this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process and therefore reducing system errors. Other sensor characteristics or your own 22 point linearisation characteristic (for mV signals) can be downloaded into the product allowing you to adapt it exactly to your application.

PC configuration allows the user to select RTD type, Range, Filter, units, linearization and Burnout direction, without requiring calibration equipment. Additionally, the user may read live process data when connected to the PC, this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process and therefore reducing system errors.

The TTR200 is mounted using two 5.5 mm holes, on standard 33 mm fixing
centres and will fit a DIN standard termination head.The TTR200 must be installed with adequate protection from moisture andcorrosive atmospheres.Enclosure colour grey.Labels - Two product identification labels indicate Serial number , Model,Input Type Range.Connection label indicates output +/- terminals and (1 to 3) Input terminals.

Thermocouple, RTD, & Process Input
Universal Power Supply 100-240 VAC
Latching Relay High or Low Limit Control
1 Latching Relay & 1 Alarm Relay
Retransmitting 4-20 mA Output
RS-485 Serial Communications Option
Modbus® RTU/ASCII Communications
Free Operating & Data Logging Software
IP55 & IP65 Fronts
1/16 & 1/4 DIN Sizes
3 Year Warranty

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total

Stand Alone Scaling (Internal or External)
These meters may be scaled without a signal source or calibrated with a signal source.

Lockout and Menu-Title Disabling

The ability to modify programming values can be restricted by installing a lockout jumper on terminals at the rear of the instrument. In addition, certain menu titles can be programmed not to appear during the menu scroll.

KEY FEATURES

4-20 mA, 1-5 V, 0-5 V, 0-10 V inputs
4½ digit + extra zero display for rate
6 digit display for total
Programmable exponent for weirs & flumes
Pump alternation control
Two 24 VDC transmitter power supplies
200 mA transmitter power supply option
2 or 4 relays & 4-20 mA output options
115 VAC or 230 VAC power
Operating temperature: -20 to 65°C
Pump Alternation (PD655 & PD656 Only)
Built-in snubbers on each relay contact
Any set point programmable for process/rate or total

Quick Overview

Input: RS-485 Modbus RTU
Display: 6-digit, 0.56" (14.2 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12-36 VDC
Operating Temperature: -40 to 65°C

Features

Master, slave, or snooper mode
2 form A relays
Linear, square root, or programmable exponent
RS-485 serial communications
Proxy polling for up to 8 process variables
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

2 form C relays
Isolated 4-20 mA transmitter output

Quick Overview

Input: Process: 0-20 mA , 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V)
Temperature: Thermocouple J, K, T, E; RTD 100 ? Pt
Display: 4-digit, 1.20" (30.5 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12-36 VDC
Operating Temperature: 0 to 65°C

Features

Sunlight readable display
Maximum/minimum display
Linear or square root with low-flow cutoff
Transmitter power option
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

2 relays or 4-20 mA analog output options
24 VDC transmitter power supply
Dual 24 VDC transmitter power supplies

Quick Overview

Input: Thermocouple J, K, T, E, R, S, B, N, C; RTD 100 ? Pt, 10 ? Cu,
120 ? Ni, 1,000 ? Pt; Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -20 to 65°C

Features

1° or 0.1° resolution
Averages up to 10 RTD sensors
Automatic cold junction compensation
Interlock relays (force on)
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Quick Overview

Input: Pulse, open collector, NPN, PNP, TTL, switch contact,
sine wave (coil), square wave, Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Start, batch, & stop with pause front panel buttons
Display batch total + rate, grand total, batch count or preset
Single or multi-stage batching with up to 8 relays
Automatic overflow correction
Manual control or automatic batching
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply
Total can count up or down

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Quick Overview

Input: Pulse, open collector, NPN, PNP, TTL, switch contact,
sine wave (coil), square wave; Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Displays rate and total simultaneously
5, 10, or 24 VDC flowmeter power supply
Gate function for rate display of slow pulse rates
4-20 mA output option converts the pulse input to an isolated
4-20 mA output
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Quick Overview

Input: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave)
Display: Dual-line 6-digit, 0.60" (15 mm) & 0.46" (12 mm)
Case: Smooth die-cast aluminum explosion-proof
Power: 85-265 VAC or 12/24 VDC option
Operating Temperature: -40 to 65°C

Features

Start, batch, & stop with pause front panel buttons
Display batch total + rate, grand total, batch count or preset
Single or multi-stage batching with up to 8 relays
Automatic overflow correction
Manual control or automatic batching
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply
Grand total can count up or down

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Features

Displays rate and total simultaneously
Open channel flow with programmable exponent
Isolated 24 VDC @ 200 mA transmitter power supply
32-point linearization with free software
Total, grand total, or non-resettable grand total
SafeTouch® through-glass button programming
Modbus® RS-485 serial communications
Flanges for wall or pipe mounting
Isolated 24 VDC @ 200 mA transmitter power supply

Options

SunBright display models
4-20 mA output with isolated 24 VDC @ 40 mA power supply
2 or 4 form C internal relays
External 4-relay & digital I/O expansion modules

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models ("H" model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.

Through-Glass SafeTouch® Buttons

The PD8 is equipped with up to four sensors that operate as through-glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, mechanical buttons located on the faceplate are used.

Modern, Sleek and Practical Enclosure

The ProtEX-MAX Series has been designed to offer the functions and features of any ProVu®, Trident X2, Snooper, or Vigilante® II model in a great looking explosion-proof housing. However, the PD8 series is not just an 1/8 DIN meter mounted in an explosion-proof housing. A special bezel and electronics were designed exclusively for the ProtEX-MAX. The bezel and faceplate give the front panel a very finished appearance and house the additional electronics for the PD8. Program and operate the meter without opening the housing using the built-in SafeTouch® through-glass button programming or the serial communication port with free Modbus® protocol.

FEATURES
Modern, Sleek and Practical Enclosure
All models available with sunlight readable displays
Display Mountable at 0°, 90°, 180°, & 270° Degrees (Display models)
Explosion-Proof, IP68, NEMA 4X Enclosure
Models Available with ProVu®, Trident X2 , Snooper, or Vigilante® II Functionality
SafeTouch® Through-Glass Button Programming
Password Protection (Select models)
Modbus® RS-485 Serial Communications
Flanges for Wall or Pipe Mounting

Sunlight Readable Display

All models of the ProtEX-MAX are available with sunlight readable displays. All PD8-765 and PD8-865 models are direct sunlight readable. All other models are available as SunBright display models ("H" model option, ie: PD8-6000-6H7) with an extraordinarily bright LED display for viewing in direct sunlight. The ProtEX-MAX is perfect for applications where the meter is in direct sunlight or in applications where visibility may be impaired by smoke, fog, dust, or distance. There are 8 user selectable intensity levels to choose from on all ProtEX-MAX models.

FEATURES
4-20 mA Input
Modern, Sleek and Practical Enclosure
3½ Digits, 1" (25.4 mm) Display
Display Mountable at 0°, 90°, 180°, & 270° Degrees
Easy Calibration and Installation
Loop-Powered Backlight Option
1 V Drop (4 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

General
Display: 3½ digit LCD, 1" (25.4 mm); -1,999 to 1,999
Display Update Rate: 2.5 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation
Overrange: Display reads 1 on the left most digit
Programming Method: Four front mounted trim potentiometers accessed when the cover is removed.
Recalibration: Recommended at least every 12 months.
Normal Mode Rejection: 60 dB rejection ratio
Operating Temperature Range: -40 to 75°C
Storage Temperature Range: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Screw terminals accept 12 to 22 AWG wire
Enclosure: Explosion-proof die cast aluminum with glass window, 0.30% max copper content, corrosion resistant epoxy coating, color: blue. NEMA 4X, IP68. Two ¾" NPT threaded conduit openings. One ¾" NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two slotted flanges for wall mounting or NPS 1½" to 2½" or DN 40 to 65 mm pipe mounting.
Overall Dimensions: 5.65" x 5.25" x 4.86" (144 mm x 133 mm x 124 mm) (W x H x D)
Weight: 5.00 lbs (80 oz, 2.27 kg)
Warranty: 3 years parts and labor

KEY FEATURES
Informative & Easy to Read Display

The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7" high and shows 5 digits of flow rate. The lower display is 0.4" high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.

Through-Glass SafeTouch® Buttons

The PD6830 is equipped with four sensors that operate as through glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.

Modern, Sleek and Practical Enclosure

The first thing customers notice about a product is its enclosure and the ProtEX-RTP really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTP shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring and one ¾" NPT hole for flowmeter connection.

Wide Viewing Angle

Customers can't always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6830 is designed to be looked at.

FEATURES
4-20 mA Input Loop-Powered
5-Digit, 0.7" (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4" (10.2 mm) Lower Display
Loop or External DC-Powered Backlight Standard
SafeTouch® Through-Glass Button Programming
Password Protection
3.0 V Drop without Backlight
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
Linear, Square Root, or Programmable Exponent
Operates from -40 to 75°C
Rate in Second, Minute, Hour, or Day
Open Collector Pulse or Alarm Output

Modern, Sleek and Practical Enclosure
The first thing customers notice about a product is its enclosure and the ProtEX-RTA really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTA shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring.

Isolated Open Collector Output

The isolated open collector output on the PD6820 may be assigned for use with the alarm or totalizer (pulse output). The rating of the output is 30 VDC @ 150 mA max.

FEATURES
4-20 mA Input Loop-Powered
Modern, Sleek and Practical Enclosure
5-Digit, 0.7" (17.8 mm) Upper Display
7 Alphanumeric Character, 0.4" (10.2 mm) Lower Display
SafeTouch® Through-Glass Button Programming
Password Protection
32-Point , Square Root, or Exponential Linearization
Loop or External DC-Powered Backlight Standard
3.0 V Drop (6.0 V with Backlight)
Explosion-Proof, IP68, NEMA 4X Enclosure
Flanges for Wall or Pipe Mounting
HART® Protocol Transparent
Operates from -40 to 75°C

ADDITIONAL FEATURES
Password Protection
A 5-digit password prevents unauthorized changes to the programmed parameter settings. The lock symbol is displayed to show that settings are protected. If the meter is password protected, the meter will display the message LOCKED when the Menu button is pressed.

Alarm Indication
The PD6800 has high or low alarm indication. When in alarm, the display will flash, and a HI or LO symbol is displayed. The alarm has an adjustable deadband (the difference between the set and reset points). The alarm is acknowledged by pressing the ENTER/ACK button.

General:
Display: 0.6" (15.24 mm) LCD, 3½+ digits; -1999 to 2999
Display Update Rate: 2 Updates/Second
Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation.
Over-Range: Display Flashes 2999
Under-Range: Display Flashes -1999
Programming Method: 4 Front Panel Pushbuttons (behind glass). Magnet may also be used for programming; P/N PDA-MAG.
Noise Filter: Programmable HI, LOW, or OFF
Recalibration: Recalibration is recommended at least every 12 months.
Max/Min Display: Max/Min readings reached by the process are stored until reset by the user or until power to the meter is turned off.
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Normal Mode Rejection: 64 dB at 50/60 Hz
Operating Temperature: -40 to 75°C
Storage Temperature: -40 to 75°C
Relative Humidity: 0 to 90% non-condensing
Connections: Removable screw terminals accept 12 to 22 AWG
Tightening Torque: Screw terminal connectors: 4.5 lb-in (0.5 Nm)
Enclosure: Explosion-proof cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X, IP68. Two ½" NPT threaded conduit openings. One ½" NPT nickel plated brass conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two mounting holes for 1.5" pipe or wall mounting.
Weight: 40 oz (1.13 kg)
Overall Dimensions: 4.30" x 4.27" x 3.62" (109 mm x 108 mm x 92 mm) (W x H x D)
Warranty: 3 years parts & labor

FEATURES
•4-20 mA Input
•3½+ Digit 0.6" Display
•Easy Four-Button Programming
•NEMA 4X Enclosure
•Programmable Noise Filter
•Loop-Powered Backlight Option
•Max/Min Display
•HART Protocol Transparent
•1.7 V Drop without Backlight
•CSA Certified for -40 to 75°C Operation
(-55 to 75°C with Heater Option)

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

FEATURES
•Temperature Transmitters
•Universal Input: RTD, TC, Ohm & mV Inputs
•Rugged General Purpose Models
•330° Rotatable Backlit LCD
•Display PV, Input Type, Eng Units & Bargraph
•Galvanic Isolation Prevents Ground Loops
•Wide Voltage Range: 10.5 to 45 VDC
•Wide Operating Temperature Range
•Protection Heads & Thermowells Available
•Order Factory Configured, Ready to Install*

•J, K, T, E, R, S, B, N, C Thermocouples
•100 or 1000 ? Platinum, 10 ? Copper, 120 ? Nickel RTDs
•1° or 0.1° Resolution
•Averages up to 10 RTD Sensors
•Automatic Cold Junction Compensation
•NEMA 4X, IP65 Front
•Universal 85-265 VAC or 12/24 VDC Input Power
•Large Dual-Line 6-Character Display, 0.60" & 0.46"
•Programmable Displays & Function Keys
•Sunlight Readable Display models
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•RS-232, RS-485 Serial Communication Options
•Modbus® RTU Protocol Standard

•Dual-Input Process Meter with Math Functions
•Addition, Difference, Average, Multiplication, Division, Min, Max, Weighted Average, Ratio, Concentration, & More
•0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
•Large Dual-Line 6-Digit Display, 0.60" & 0.46"
•Sunlight Readable Display Models
•NEMA 4X, IP65 Front
•Universal 85-265 VAC, or 12/24 VDC Input Power Models
•Isolated 24 VDC @ 200 mA Transmitter Power Supply

•Programmable Display & Function Keys
•32-Point, Square Root, or Exponential Linearization
•Multi-Pump Alternation Control
•2 or 4 Relays + Isolated 4-20 mA Output Options
•External 4-Relay & Digital I/O Expansion Modules
•USB, RS-232 & RS-485 Serial Communication Options
•Modbus® RTU Communication Protocol Standard
•Free MeterView® Pro Software for Operation, Monitoring, and Programming

The WRX900 receiver is used together with the WTX700 in head temperature transmitter for wireless
temperature measurement. The product converts the measured temperature values received into isolated
current or voltage signals (0(4) to 20) mA, (0 to 10V) as well as making them available via a digital RS485
interface. The WRX900 will accept wireless signals from up to 16 WTX700 in head transmitters. Any one of
the temperature values received can be linked to any one of the analogue or relay outputs and all are
available via the RS485 digital interface.

Download Product Data Sheet

The WTX700 series in head temperature transmitter is a new generation of wireless temperature measurement solutions from Status Instruments. It has been designed to accept most common temperature sensors including those from RTD and thermocouple sensors as well as slidewire and mV signals. The measured value is transmitted to the DIN Rail mounted base station (WRX900), this can accept signals from up to 16 WTX700 transmitters.

Download Product Data Sheet

Single, multi-channel or custom
rack mounted models
Small size enclosure
RS-232 communications
0 to 10 V or 4 to 20 mA analogue output
Rugged, flexible probes
Temperature range: 0ºC to 300ºC
Different probe lengths and configurations available

Download Product Data Sheet

A general purpose fabricated type K thermocouple
housed in a 316 stainless steel
sheath 3/16” diameter x 150 mm long with
2 m PTFE flat pair lead. Insulated hot junction
suitable for 250°C.

Download Product Data Sheet

The MM2000 series carry a two year
warranty as standard. All instruments
are microprocessor driven, providing
exceptionally high accuracy and
long term stability. They also feature
a very wide operating range (-30 to
50ºC), have a resolution of 0.1 to
1000 and are autoranging.

Download Product Data Sheet

The MM3000 is a low cost thermometer
complete with fold out needle probe,
which is adjustable for different angles to
suit a variety of applications. This high
accuracy microprocessor based instrument
has a measurement range of -50 to +150 °C
and an operating range of -30 to 50 °C.

Download Product Data Sheet

The MM3000 is a low cost thermometer
complete with fold out needle probe,
which is adjustable for different angles to
suit a variety of applications. This high
accuracy microprocessor based instrument
has a measurement range of -50 to +150 °C
and an operating range of -30 to 50 °C.

Download Product Data Sheet

The BB982 Portable Blackbody Calibration
Source allows for calibration of non-contact
infrared thermometers over the temperature
range -10°C to 80°C.
It is suitable for use as a primary radiation
source for infrared thermometers from sub
zero to 80°C.
Laboratory performance and low
uncertainty calibrations are ensured by the
combination of high emissivity and excellent
temperature uniformity.
The digital temperature controller allows
the block temperature to be set to any
value from -10°C to 80°C.

Download Product Data Sheet

The BB976 Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature
range 30°C to 550°C.
It is suitable for use as a primary radiation source for infrared thermometers. Laboratory performance and low uncertainty calibrations are ensured by the combination of high emissivity and excellent temperature uniformity.
The digital temperature controller allows
the block temperature to be set to any
value from 30°C to 550°C.

Download Product Data Sheet

Wide temperature range from 150 to 2475°C
Industry leading signal dilution capability
Revolutionary ESP algorithms provide ‘aim and read’ capability for applications where single and dual wavelength sensors cannot take
readings.
Views through obstructions like steam, smoke, plasma, dirty optics, dust and most common window materials
Can be used in applications with a partially filled field of view caused by mechanical obstructions and a small or wandering target

Download Product Data Sheet

Wide temperature range from 150°C to 2475°C
A signal dilution capability as much as 50 times greater than other two-colour technology allows the PRO series sensorto view smaller hot spots, through greater obstructions, with better accuracy.
Views through optical obstructions such as scale, heavy steam, smoke, water spray, dirty optics, and mechanical obstruction.
ESP Filtering provides advanced emissivity and signal dilution based
signal conditioning and qualification.
Single-detector design assures longterm calibration stability.
Self-aligning to the hottest temperature viewed.
Views through common window materials.

Download Product Data Sheet

Temperature ranges to 2475°C
Fully configurable for range, emissivity, peak hold, averaging, alarm parameters and set points via RS232/RS485 communications
Accuracy to 0.25% of reading
Different spectral ranges to suit many applications
Precision optics.
Visual aiming or fibre-optic versions
Short wavelength operation dramatically reduces sensitivity to emissivity variation
Views through common window materials.
As much as ten times more accurate than long-wavelength sensors when measuring low-emissivity materials such as aluminium, chrome, stainless steel, tin and zinc.

Download Product Data Sheet

-40ºC to 700ºC Measurement Range
Adjustable Emissivity From 0.1 to 1.00
Choice of 0/4 to 20 mA, 0 to 5 V and Type J or K Thermocouple Outputs
Backlit LCD Display
Miniature Sensing Head
RS-485 Interface
Configurable Relay Output

Download Product Data Sheet

Welded 316 ST/STEEL construction for screw fitting into process
connections or STW series pockets (except style 2).
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½" BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)

Download Product Data Sheet

316 Stainless Steel
Sealed to IP67
33mm Mounting Holes for Transmitter and Connection Blocks
Height 65mm
Swing Diameter 78mm

Download Product Data Sheet

Moulded in general purpose ABS, the
external fixing points provide a simple and rapid means of mounting sensors directly onto ducts, dispensing with the
need for separate mounting plates.
The unit is supplied fully assembled and consists of a body, cap, locking nut and sealing rings. Accessories include, a
cap retaining chain or strap, clip in blanking plugs, OEM labels and mounting kits. The unit can also be supplied in
separate parts. The only tool required for assembly is an 8 mm Allen Key.

Download Product Data Sheet

Polished Stainless Steel Construction
M16 x 1.5 entries
Wall or Temperature Probe Mount Versions
Sealed to IP67
For use with DM640/SEM710 series

Download Product Data Sheet

The SCH4 series of probe connection heads has a wide range of entry sizes and positions. The head will accept standard
connecting blocks and most standard head mounting transmitters. It also has two pillars for self tapping screws which
enable a low cost terminal block to be fitted for Energy Management applications. Moulded in general purpose ABS, the
external fixing points provide a simple and rapid means of mounting sensors directly onto ducts, dispensing with the
need for separate mounting plates.
The unit is supplied fully assembled and consists of a body, cap, locking nut and sealing rings. Accessories include, a
cap retaining chain or strap, clip in blanking plugs, OEM labels and mounting kits. The unit can also be supplied in
separate parts. The only tool required for assembly is an 8 mm Allen Key.

Download Product Data Sheet

Suitable for Pt100,Ni100,Cu53,Cu100 temperature sensors
20 mm LCD Display for good readability
Max/Min Process Temperature
Sensor, Wall or Panel Mount Housing Options
Stainless Steel Construction (100 mm diameter)
IP65 Enclosure

Download Product Data Sheet

Suitable For Use With Pt100 or Thermocouple Temperature Probes
Battery powered
Sensor,Remote or Wall Mounted versions
Push button configurable
4 digit display
Sealed to IP67
Atex approved in ABS housing

Download Product Data Sheet

Update time 200 mSResponse Time 0.5 seconds
Start up time 1 seconds ( Vout 0.0 V duringstart up)
Power Supply (12 to 30) Volts dc
Warm-up Time 1 Minute
Download Product Data Sheet

Update time 200 mS
Response Time 0.5 seconds
Start up time 4 seconds ( I out < 4 mA duringstart up)
Warm-up time 1 minute to full accuracy
Power Supply (8 to 30) Volts dc
Download Product Data Sheet

All welded 316 ST/STEEL sensor for screw fitting into process connections or
STW series pockets. Designed to be used with the Status SCH4 connecting head
or the DM400/500 local indicators it features a “running nut” head which
enables the indicator to be orientated to the optimum viewing position.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75,100,150,200,250 immersion
Process Thread ½” BSP parallel
Extension 9.5 dia x 75 long
Head Thread M16 x 1.5
Tails 3 wire 7.0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)

Download Product Data Sheet

Square aluminium block, strap-on-sensor with flying lead for clamping
directly to pipes.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath ¼ ” square x 50 long
Extension 4.0 dia x 19 long
Cable 3 wire 7/0.2 Cu PTFE insulated, 1 m long
Temp Range (-50 to 200) °C (at tip)

Download Product Data Sheet

Flying lead sensor with 316 ST/STEEL sheath for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Cable 3 wire 7/0.2 Cu PTFE insulated, 1 m long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet

All welded 316 ST/STEEL construction combined inset sensor and pocket.
This sensor is designed to be used with a spring mounting kit fitted to the
transmitter or terminal block to provide faster response times. The type
of transmitter/terminal block and connecting head required must be
specified when ordering.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 7.9 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½” BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip

Download Product Data Sheet

All welded 316 ST/STEEL construction sensor for fitting into a compression gland.
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Head Thread M24 x 1.5
Tails 3 wire 7/0.2 Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip).

Download Product Data Sheet

Welded 316 ST/STEEL construction for screw fitting into process
connections or STW series pockets (except style 2).
Element Pt100 to BS.EN 60751 IEC751 Class B*
Sheath 6.0 dia x 75, 100, 150, 200, 250 immersion
Process Thread ½" BSP parallel
Extension 12.7 dia x 75 long
Head Thread M24 x 1.5
Tails 3 wire 7/0.2Cu PTFE insulated, 150 long
Temp. Range (-50 to 200) °C (at tip)
Download Product Data Sheet

It is housed in a shallow-depth, 1/8 DIN enclosure that features a
NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.

Process Inputs: 0-20 mA, 4-20 mA, 1-5 V, -10 to 10 V
Temperature Inputs: J, K, T, E TC; 100 ? Pt RTD
Display: 0.56" (14 mm) Red LED 4 Digits
Case: 1/8 DIN, High Impact Plastic, Shallow Depth
Power: 85-265 VAC or 12-36 VDC

Download Product Data Sheet

Test Drive the Trident Meter By Using the Online Virtual Meter Below:
Trident Virtual Meter

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
ALU or ABS housing
WITH or WITHOUT display
TH300
remote probe
TH300
standard
• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro interchangeable probes (PC or stainless steel)
• On-site calibration
• Simultaneous display of 1 to 4 parameters
• External transmitter inputs (KIMO Class 200 and 300)
• 2 outputs 4-20 mA (4 wires) or 0-10V, RS 232, 2 RCR relays 6A/230 Vac
• 2 visual alarms (dual color LED) and audible alarm (buzzer - 80 dB)
• Output diagnostics
• MODBUS network RS 485 system (optional)
• ABS or ALU IP 65 housing, with or without backlit graphic display.
• Quick and easy mounting using “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range .......................................0 to 100 % RH
Units of measurement ..............................% RH
Accuracy*(Repeatability, linearity, hysteresis) ......±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence ........................±0.04 x IT-20I%RH (if T<15°C or T>25°C)
Response time ..........................................<10 sec. (from 10% RH to 80%RH, Vair=2m/s)
Resolution .................................................0,1 % RH
Factory calibration uncertainty ...............±0.88%RH
Type of sensor ..........................................capacitive
Type of fluid ...............................................air and neutral gases (high resistance to solvents)

Temperature
Measuring range .......................................from -20 to +120°C (polycarbonate probe)
from -40 to +180°C (stainless steel probe)
Units of measurement ..............................°C, °F
Accuracy * .................................................±0,3% of reading ±0,25°C
Response time .......................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution .................................................0,1°C
Type of sensor...........................................Pt 100 1/3 selon DIN IEC 751
Type of fluid...............................................air and neutral gases

Download Product Data Sheet

• Ranges from 0-100%RH and -40 to +180°C (probe dependent)
• Configurable intermediate ranges
• Functions : relative and absolute humidity, dew point, wet and
dry temperature, enthalpy.
• Smart-Pro system interchangeable probes (PC or Stainless Steel)
• On-site calibration
• Simultaneous display of 2 parameters
• 2 outputs 4-20 mA or 0-10V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
• 2 visual (dual color LED) and audible (buzzer) alarms
• Output diagnostics
• ABS IP 65 housing, with or without 2-line backlit display.
• Quick and easy mounting using the “1/4 turn” system with wall-mounting plate.

Humidity
Measuring range.................................0 to 100 %RH
Units of measurement........................%RH
Accuracy*(Repeatability, linearity, hysteresis) ±1,5%RH (from 3 to 98%RH and if 15°C T 25°C)
Temperature dependence..................±0.04 x (T-20)%RH (if T<15°C or T>25°C)
Response time ....................................<10 sec. (from 10% RH to 80%RH, V =2m/s) air
Resolution ...........................................0,1 %RH
Factory calibration uncertainty .........±0.88%RH
Type of sensor ....................................capacitive
Type of fluid.........................................air and neutral gases (high resistance to solvents)

Temperature
Measuring range.................................from -20 to +120°C ( polycarbonate probe)
from -40 to +180°C (st.steel probe)
Units of measurement........................°C, °F
Accuracy *...........................................±0,3% of reading ±0,25°C
Response time.................................... t = 9 sec. for V = 1 m/s 0,9 air
Resolution...........................................0,1°C
Type of sensor....................................Pt 100 1/3 as per DIN IEC 751
Type of fluid ........................................air and neutral gases

Download Product Data Sheet

• Temperature transmitter type TM100.
• Measuring ranges from 0 to +50°C, -20 to +80°C, -50 to +50°C,
0 to 100°C (see “Configuration”)
• 0-10 V or 4-20 mA output, active sensor, power supply 24 Vac/Vdc (3-4 wires)
or 4-20 mA output , passive loop, power supply 18 to 30 Vdc (2 wires).
• ABS IP 65 and IP 30 housing, with or without display.
• Quick and easy mounting “1/4 turn” system on wall-mount plate.

Measuring range ..................................0 to +50°C, -20 to +80°C, -50 to +50°C, 0 to +100°C
Units of measurement .......................°C, °F
Accuracy * ..........................................±0,5% of reading ±0,4°C
Response time ...................................1/e (63%) 5 sec. (ambient)
1/e (63%) 20 sec. (air tight)
Resolution ..........................................0,1°C
Type of sensor....................................Pt 100 class A as per DIN IEC751
Type of fluid........................................air and neutral gases

Download Product Data Sheet

It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

-Simple configuration via USB port
- Isolated PT100, thermocouple input
- Display temperature in °C /°F or output drive in mA
- Push button user trim
- (4 to 20) mA two wire output
- Housing ABS plastic or stainless steel
- 10 year warranty

Download Product Data Sheet