PD6830 ProtEX-RT 5 Digit Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer
PD6830 ProtEX-RT 5 Digit Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer
PD6830 ProtEX-RT 5 Digit Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer
The new ProtEX-RTP PD6830 explosion-proof rate/totalizer brings modern design, easy readability, and enhanced functionality to hazardous areas around the world in a way never seen before. Competitors have lost sight of the fact that the primary thing customers want to do with meters such as these is to look at them. Customers want a meter that looks nice so they can be proud to install it in their facility. And they want a meter with a display that provides the important information about their process, can be seen under varied lighting conditions, from wide angles, and from a distance. The PD6830 delivers all these and more. Spend a few minutes reviewing the features described in the graphic below and you will see how!
KEY FEATURES
Informative & Easy to Read Display
The high contrast, backlight LCD display is easy to read from far away and under various lighting conditions. The upper display is 0.7" high and shows 5 digits of flow rate. The lower display is 0.4" high and shows either flow total or a tag with 7 alphanumeric characters. And best of all, the display is mounted right up against the glass so it can be seen from a wide viewing angle.
Through-Glass SafeTouch® Buttons
The PD6830 is equipped with four sensors that operate as through glass buttons so that it can be programmed and operated without removing the cover (and exposing the electronics) in a hazardous area. These buttons can be disabled for security by selecting the LOCK setting on the switch located on the connector board in the base of the enclosure. To actuate a button, press one finger to the glass directly over the marked button area. When the cover is removed, four mechanical buttons located next to the sensors are used.
Modern, Sleek and Practical Enclosure
The first thing customers notice about a product is its enclosure and the ProtEX-RTP really shines here. The copper-free (0.30%), smooth, die-cast aluminum NEMA 4X (IP68) enclosure is finished with a corrosion resistant epoxy coating that literally does make the ProtEX-RTP shine. The built-in mounting flanges make for convenient wall or pipe mounting and there is even a slot on the back of the enclosure for centering on the pipe. There are two ¾" NPT conduit holes for wiring and one ¾" NPT hole for flowmeter connection.
Wide Viewing Angle
Customers can't always look at the display from straight on, so the window and display module have been optimized to provide a wide viewing angle of approximately +/- 40°; nearly twice the competition! Remember, the PD6830 is designed to be looked at.
Gallery
Loading...
