The unit is microprocessor based. The sensor type is selected from a simple to use menu system which is navigated by the use of three push buttons located on the rear of the display. This feature enables the user to easily configure the device in the field without the use of any other equipment. The DM640P and DM640TC are sealed into a cap as pictured above. There are several mounting options including the SCH4 series of enclosures and a stainless steel option.

ATEX versions are available for use in hazardous dust and gas areas.

- Battery powered
- RTD or TC input options
- Push button configurable
- 4 digit display
- Housing ABS plastic or stainless
- Sealed to IP67
- 10 year warranty
- Atex approved in ABS housing

Download Product Data Sheet

The thermometer operates from standard "AA" alkaline batteries for over 2 years at the 12 second update rate.

A selection of compatible temperature sensors are available with various immersion lengths and process connections.

- 20 mm LCD Display
- Max/Min Logging
- Pt100 Temperature Sensor
- Never Needs Calibrating
- Stainless Steel Case (100 mm diameter)
- IP65 Enclosure

Download Product Data Sheet

It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It comes in either our SCH4 ABS plastic connector head or our new SCH15 Stainless steel connector head.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM710 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

-Simple configuration via USB port
- Isolated PT100, thermocouple input
- Display temperature in °C /°F or output drive in mA
- Push button user trim
- (4 to 20) mA two wire output
- Housing ABS plastic or stainless steel
- 10 year warranty

Download Product Data Sheet